Canon imagePRESS 1135 Series Service Manual page 141

2
Technology > Pickup / Feed System > Pick-up Area Control/Function > Lifter control
In the case of pickup completion/jam
To wait for the fan airflow to be settled down, the lifter is stopped for 5.0 sec after all of the
fans are stopped.
If the paper surface sensor 2 is ON, the lifter is moved down until the sensor is turned OFF,
and then moved up until the sensor is turned ON.
If the paper surface sensor 2 is turned OFF, the lifter is moved up until the sensor is turned
ON.
If the paper is caught in the pickup assembly in the case of jam, the paper surface sensor 2
fails to be turned OFF even if the lifter is moved down because the paper surface link does
not go down.
If the pull-out sensor is ON, the lifter is moved down until the lifter lower position sensor is
turned ON.
2 Technology > Pickup / Feed System > Pick-up Area Control/Function > Lifter control
2-93
2-93