4
Parts Replacement and Cleaning > PCB > Removing Primary Pre-transfer Charging High-voltage PCB
Removing Primary Pre-transfer Charging High-voltage PCB
<Preparation>
1) Remove Rear Right Cover.
(Refer to page 4-55)
4
Parts Replacement and Cleaning > PCB > Removing Primary Pre-transfer Charging High-voltage PCB
1) Remove the Ground wire.
• 1 screw
• 3 wire-saddles
2) Remove the 4 connectors.
3) Remove the pre-primary transfer charging high-voltage plate.
• 4 PSB supports.
Primary pre-transfer
charging high-voltage
x4
PCB
x3
PCB support
wire-saddle
PCB support
4-360
F-4-818
4-360