Canon imagePRESS 1135 Series Service Manual page 195

2
Technology > MEAP > Setting the method to login to SMS > Setting for login by Password Authentication
2) Select [System Management] tab > [Utility] tab > [Application Management Function] tab.
2 Technology > MEAP > Setting the method to login to SMS > Setting for login by Password Authentication
3) Enter a check mark against the SMS Installer Service (Password Authentication) radio
button and click on either Start or Stop. Check that the status has changed accordingly.
F-2-208
4) Logout once and login again to check to see that the setting is applied properly.
When password authentication has been set to Start, the password entry window will now
be displayed. If password authentication has been set to Stop, when an attempt is made to
log in, the error message shown below will be displayed and login will not be possible.
Login error screen
Password authentication started
2-147
F-2-209
F-2-210
Password authentication stopped
2-147