Canon imagePRESS 1135 Series Service Manual page 236

2
Technology > eM Controller-E1 > FAQ
Q10: Describe about the behavior of the e-Maintenance/ imageWARE Remote system while
enabling the Real Deep Sleep functionality.
A10: While being in Real Deep Sleep, and if data to be sent is in the e-Maintenance/
imageWARE Remote system, the system wakes up asleep, then starts to send the data to
the UGW. The system also waits for completion of data transmission and let the device to
shift to asleep status again. However, transition time to the Real Deep Sleep depends on
the device, and the transition to sleep won't be done if the next data transmission will be
done within 10 minutes.
Q11: Is the e-Maintenance/ imageWARE Remote system compatible with Section counter?
A11: No, the e-Maintenance/ imageWARE Remote system does not support Section counter.
2 Technology > eM Controller-E1 > FAQ
2-188
2-188