4
Parts Replacement and Cleaning > PCB > Removing the Deck Driver PCB
Removing the Deck Driver PCB
<Preparation>
1) Pull out Waste Toner Case Unit.
(Refer to page 4-56)
2) Pull out Paper Deck
(Refer to page 4-148)
3) Remove Paper Deck
(Refer to page 4-149)
2) Remove the cover 2.
• 2 edge saddles
• 2 reuse bands
• 2 screws
x4
x2
Reuse band
4
Parts Replacement and Cleaning > PCB > Removing the Deck Driver PCB
1) Remove the cover 1.
• 1 screw
Edge saddle
Cover 2
F-4-880
Cover 1
3) Remove the deck driver PCB.
• 6 connectors
• screws
x6
x4
4-388
F-4-879
F-4-881
4-388