Malfunction; Front Cover Distortion Correction - Canon imagePRESS 1135 Series Service Manual

Malfunction

Front cover distortion correction

When the front cover is distorted (when the cover of the bottom area is distorted), perform the
following measures.
[Assumed causes]
Left front cover : While the fixing feeder lever was shifted down, the front cover was opened
and closed.
While the cover was overloaded, the operation was made.
Right front cover : While the cover was overloaded, the operation was made.
[Measures]
1) Put your hands on the upper and lower sides of the cover, and stretch to the direction of
arrow to correct the distortion.
6
Troubleshooting > Malfunction > Front cover distortion correction
F-6-18
6 Troubleshooting > Malfunction > Front cover distortion correction
2) Make sure that the front cover is no longer distorted.
• How to check :
Left front cover : When you close the cover while pressing the handle, make sure that the lower
magnet catch comes before or at the same time as the upper one.
Right front cover : When you close the cover while pressing the handle, make sure that the lower
magnet catch comes before or at the same time as the upper one.
Left front cover Handle Magnet catch (upper)
Magnet catch (lower)
6-18
Magnet catch (upper) Right front cover
Magnet catch (lower) Handle
F-6-19
6-18