Canon imagePRESS 1135 Series Service Manual page 967

COPIER> DISPLAY> ANALOG
TEMP2 Display of ITB temperature
Lv.1 Details Displaying temperature on ITB.
Measured by the ITB environment sensor (PS124) that detects ITB.
Use case When checking temperature on ITB.
Adj/set/operate method N/A (display only)
Unit Degree C
Appropriate target value 20 to 27
HUM2 Display of ITB humidity
Lv.1 Details Displaying humidity on ITB.
Measured by the ITB environment sensor (PS124) that detects ITB.
Use case When checking humidity on ITB.
Adj/set/operate method N/A (display only)
Unit %
Appropriate target value 30 to 70
DK1-TEMP Dspl of inside temperature of POD deck
Lv.1 Details Displaying temperature inside the POD deck storage.
Measured by the environment sensor (HS601) found at the upper
deck.
Use case When checking the temperature inside the storage.
Adj/set/operate method N/A (display only)
Unit Degree C
Appropriate target value 20 to 27
Related service mode COPIER> DISPLAY> ANALOG> DK2-TEMP, DK3-TEMP
DK2-TEMP Dspl of inside temperature of POD deck2
Lv.1 Details Displaying temperature inside the secondary POD deck storage.
Measured by the environment sensor (HS601) found at the upper
deck.
Use case When checking the temperature inside the storage.
Adj/set/operate method N/A (display only)
Unit Degree C
Appropriate target value 20 to 27
Related service mode COPIER> DISPLAY> ANALOG> DK1-TEMP, DK3-TEMP
DK1-HUM Dspl of inside humidity of POD deck
Lv.1 Details Displaying humidity inside the POD deck storage.
Measured by the environment sensor (HS601) found at the upper
deck.
Use case When checking the humidity inside the storage.
Adj/set/operate method N/A (display only)
Unit %
Appropriate target value 30 to 70
Related service mode COPIER> DISPLAY> ANALOG> DK2-HUM, DK3-HUM
8
Service Mode > COPIER > DISPLAY (Status Display Mode) > ANALOG
8 Service Mode > COPIER > DISPLAY (Status Display Mode) > ANALOG
COPIER> DISPLAY> ANALOG
DK2-HUM Dspl of inside humidity of POD deck2
Lv.1 Details Displaying humidity inside the secondary POD deck storage.
Measured by the environment sensor (HS601) found at the upper
deck.
Use case When checking the humidity inside the storage.
Adj/set/operate method N/A (display only)
Unit %
Appropriate target value 30 to 70
Related service mode COPIER> DISPLAY> ANALOG> DK1-HUM, DK3-HUM
FIX-EX2C Center temp of ex-heat roller2: mainTH
Lv.1 Details Displaying temperature on the center surface of external heat roller 2,
which is detected by the main thermistor.
Use case When checking temperature on the center surface of external heat
roller 2.
Adj/set/operate method N/A (display only)
Unit Degree C
Appropriate target value At standby: 230 -/+ 10
At print: 230 -/+ 10 (the value differs depending on paper type, paper
grammage, or the mode (priority on image/productivity)
FIX-EX2E Edge temp of ex-heat roller2: subTH
Lv.1 Details Displaying temperature on the edge surface of external heat roller 2,
which is detected by the sub thermistor.
Use case When checking temperature on the edge surface of external heat
roller 2.
Adj/set/operate method N/A (display only)
Unit Degree C
Appropriate target value At standby: 220 -/+ 10
At print: 230 -/+ 10 (the value differs depending on paper type, paper
grammage, or the mode (priority on image/productivity)
ABS-HUM2 Dspl of inside moisture content
Lv.1 Details Displaying humidity inside the machine.
Measured by the ITB environment sensor (PS124) that detects the
innter atmosphere.
Use case When checking moisture content inside the machine.
Adj/set/operate method N/A (display only)
3
Unit g (g/m )
Appropriate target value 0 to 22
MI1-HUM Humidity dspl of multi inserter storage
Lv.1 Details Displaying humidity in the deck of the multi insertion unit.
Measured by the environment sensor that detects the deck.
Use case When checking humidity in the deck.
Adj/set/operate method N/A (display only)
Unit %RH
Appropriate target value 30 to 70
Related service mode COPIER> DISPLAY> ANALOG> DK1-HUM, DK2-HUM, DK3-HUM
8-24
8-24