Removing Secondary Transfer Outer Roller - Canon imagePRESS 1135 Series Service Manual

4
Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing Secondary Transfer Outer Roller

Removing Secondary Transfer Outer Roller

<Preparation>
1) Open the Front Left Cover and the Front Right
Cover.
(Refer to page 4-54)
2) Pull Out Fixing Feed Unit.
(Refer to page 4-120)
3) Remove Secondary Transfer Outer Unit.
(Refer to page 4-86)
3) Remove the 2 stop rings.
4 Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing Secondary Transfer Outer Roller
1) Remove the 2 screws.
x2
F-4-563
2) Lift the post-secondary transfer guide and put it down on front.
Caution :
Since the harness is connected to the post-secondary transfer guide, be careful not
to pull it forcibly.
Post-secondary
transfer guide
4-258
Harness
F-4-564
F-4-565
4-258