Canon imagePRESS 1135 Series Service Manual page 568

4
Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing External Main Thermistor (upper), External Heat Sub Thermistor (upper), External Heat Main Thermistor (lower) a
8) Remove the external heat main thermistor (lower).
• 1 screw
10) Free the harness of the external heat main thermistor (upper)/(lower) and the external heat sub
thermistor (upper)/(lower).
• 2 Clips
• 2 Harness Guides
x4
4 Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing External Main Thermistor (upper), External Heat Sub Thermistor (upper), External Heat Main Thermistor (lower) a
9) Remove the external heat sub thermistor (lower).
• 1 screw
F-4-685
Caution:
When installing the harness, be sure to put it in the guide with the Harness Band
positioned as shown in the figure below.
Harness Guide
Harness Band
F-4-687
F-4-686
Harness Band
Harness Guide
Harness Band
F-4-688
4-304
4-304