4
Parts Replacement and Cleaning > PCB > Removing the Main Controller PCB 1 Unit
PCB
Removing the Main Controller PCB 1 Unit
<Preparation>
1) Remove Rear Left Cover.
MEMO :
(Refer to page 4-55)
Be sure to remove the option parts
first before removing the main
2) Open the Controller Box Unit.
(Refer to page 4-57)
controller PCB 1 unit.
•
Voice guidance PCB
•
PCI bus extension kit-F1
•
IPSec board-B1
•
PS multi kit-A1
•
HDD data encryption kit-B7
1) Remove the 1 connector.
4
Parts Replacement and Cleaning > PCB > Removing the Main Controller PCB 1 Unit
Voice guidance PCB
PS multi kit-A1
IPSec board-B1
HDD data encryption
kit-B7
2) Remove the main controller PCB1 unit in the direction of the arrow.
• 2 screws
F-4-803
PCI bus extension kit-F1
x2
4-352
F-4-802
F-4-804
4-352