Canon imagePRESS 1135 Series Service Manual page 699

5) Change the feed setting to 8.
Non-coated paper
Paper 52 to 64 to
2-sided
weight 63 79
250 mm 75% to 100% 5 3
or more in
50% to 74% 6 4
paper width
25% to 49% 7 5
(landscape)
0% to 24% 8 5(6)
Less than 75% to 100% 6 3
250 mm in
50% to 74% 7 4
paper width
25% to 49% 8 5
(portrait)
0% to 24% 9 6
Limit value 10 10
6) Check the paper feed adjustment at 2-sided printing screen.
* Although the value is 5 in the setting, "0" is displayed on the paper feed
adjustment screen.
6
Troubleshooting > Feeding Failure > Remedy against 0112 Jam > User Mode and Machine Operation
80 to 106 to 129 to 151 to 181 to
105 128 150 180 256
2 0 0 0 0
3 0 0 0 0
4 0 0 0 0
5 0 0 0 0
2(3) 0 0 0 0
3(4) 0 0 0 0
4 0 0 0 0
5 0 0 0 0
10 10 10 7 5
F-6-37
6 Troubleshooting > Feeding Failure > Remedy against 0112 Jam > User Mode and Machine Operation
7) Set the value to 3 by pressing [+] 3 times, and then press [OK].
The feed setting on the screen is changed from 0 to 3, and paper feed adjustment at
2-sided printing is complete.
257 to
300g
0
0
0
0
0
0
0
0
5
T-6-17
Non-coated paper
2-sided Paper weight
250 mm 75% to 100%
or more in
50% to 74%
paper width
25% to 49%
(landscape)
0% to 24%
Less than 75% to 100%
250 mm in
50% to 74%
paper width
25% to 49%
(portrait)
0% to 24%
Limit value
Inside the machine, the value is changed in this way.
F-6-38
Before change After change
52 to 63 52 to 63
5 8
6 9
7 10
8 10
6 6
7 7
8 8
9 9
10 10
T-6-18
6-32
6-32