Canon imagePRESS 1135 Series Service Manual page 854

Detail
Code Location Item
Code
E602 FF01 00 Title Error in the Hard Disc
Description Error in the unspecified partition.
of detection
Measures 1. Check the cable and power connector, etc.
2. If the problem persists after the above is performed,
activate using the save mode, and re-install all format and
system (SYSTEM, LANGUAGE, RUI) on the SST, and turn
the main power OFF/ON.
3. If the problem still persists, it is concluded that there is
trouble in the HDD, hence replace the HDD and re-install
the system.
E602 FF02 00 Title Error in the Hard Disc
Description Error in the unspecified partition.
of detection
Measures 1. Check the cable and power connector, etc.
2. If the problem persists after the above is performed,
activate using the save mode, and re-install all format and
system (SYSTEM, LANGUAGE, RUI) on the SST, and turn
the main power OFF/ON.
3. If the problem still persists, it is concluded that there is
trouble in the HDD, hence replace the HDD and re-install
the system.
E602 FF03 00 Title Error in the Hard Disc
Description Error in the unspecified partition.
of detection
Measures 1. Perform HDD-CHECK (required time: several tens minutes)
by CHK-TYPE=0, and turn the power OFF/ON.
2. If the problem persists, perform HDD-CLEAR with
CHK=1,2,3,5, and turn the power OFF/ON
E602 FF04 00 Title Error in the Hard Disc
Description Error in the unspecified partition.
of detection
Measures 1. Check the cable and power connector, etc.
2. If the problem persists after the above is performed,
activate using the save mode, and re-install all format and
system (SYSTEM, LANGUAGE, RUI) on the SST, and turn
the main power OFF/ON.
3. If the problem still persists, it is concluded that there is
trouble in the HDD, hence replace the HDD and re-install
the system.
7
Error Code > Error Code > Error Code Details
Description
7 Error Code > Error Code > Error Code Details
Detail
Code Location Item
Code
E602 FF05 00 Title Error in the Hard Disc
Description Error in the unspecified partition.
of detection
Measures Error that usually doesn't occur.
1. Perform HDD-CLEAR with CHK=1,2,3,5, and turn the
power OFF/ON
2. If the problem still persists, it is concluded that there is
trouble in the HDD, hence replace the HDD and re-install
the system.
E602 FF10 00 Title Error in the Hard Disc
Description Error in the unspecified partition.
of detection
Measures Error caused by garbled data and software bug.
1. Activate using the save mode, re-install all the format and
system (SYSTEM, LANGUAGE, RUI) on the SST, turn the
main power OFF/ON.
2. If the problem still persists, it is concluded that there is
trouble in the HDD, hence replace the HDD and re-install
the system.
E602 FF11 00 Title Error in the Hard Disc
Description Error in the unspecified partition.
of detection
Measures The error that does not occur in normal Read/Write level.
1. Check the cable and power connector, etc.
2. If the problem still persists, it is concluded that there is
trouble in the HDD, hence replace the HDD and re-install
the system.
E602 FF12 00 Title Error in the Hard Disc
Description Error in the unspecified partition.
of detection
Measures Error caused by garbled data and software bug.
1. Activate using the save mode, re-install all the format and
system (SYSTEM, LANGUAGE, RUI) on the SST, turn the
main power OFF/ON.
2. If the problem still persists, it is concluded that there is
trouble in the HDD, hence replace the HDD and re-install
the system.
7-122
Description
7-122