Login To Sms - Canon imagePRESS 1135 Series Service Manual

2
Technology > MEAP > Login to SMS > Login by Password Authentication

Login to SMS

SMS login may be done by entering a password for authentication, or by authentication via
the Remote Login Service (RLS) login window (RLS authentication). Settings can be changed
to allow either only one of these methods or both of them.
SMS login window (password authentication)
Login method Authentication method Authentication service name Users who may log in
Password Password authentication SMS Installer Service
authentication (Password Authentication)
RLS login SSO-H/SSO(SDL also SMS Installer Service(Remote
possible) Login Service Authentication)
NOTE:
If Default Authentication is selected as the device authentication method, 'RLS
Authentication' is not selectable as SMS Login method. Also, if 'RLS Authentication' is
selected, the device authentication method (Default Authentication, SDL, SSO) cannot
be changed.
2 Technology > MEAP > Login to SMS > Login by Password Authentication
F-2-203
RLS login window
(user name/ password authentication)
Users who know the
SMS login password
Users registered as
administrators with
SSO-H/ SSO
T-2-98
■ Login by Password Authentication
In the SMS login window, enter the password for authentication. Only one password can be
registered with SMS. The login procedures are as follows.
1) Access SMS from the browser of a PC on the same network as the MEAP device. The URL
is as follows.
URL: http://<MEAP Device IP address>:8000/sms/
Ex.) http://172.16.188.240:8000/sms/
NOTE:
• The default password is "MeapSmsLogin." (The password is case-sensitive.)
• When you want to change the display original language, change in the box in the right of
the screen. This setting is not affect by the setting of the language of the device.
2-144
F-2-204
2-144