4
Parts Replacement and Cleaning > Main Unit > Removing Supply Pipe Unit
Caution : caution when installing
After tightening the Stepped Screw
completely, check that the thickness of the
spring is 15 mm.
F-4-105
16) Move the interlock unit.
• 5 screws
x5
4
Parts Replacement and Cleaning > Main Unit > Removing Supply Pipe Unit
15) Remove the Process Unit in the direction of the arrow.
• 4 screws
17) Remove the supply pipe unit.
• 1 connector
• 1 wire
saddles
• 5 screws
F-4-107
x4
Supply pipe unit
x5
Connector Wire saddle
4-82
F-4-106
F-4-108
4-82