Canon imagePRESS 1135 Series Service Manual page 795

Detail
Code Location Item
Code
E580 8023 51 Title Error in lock of stack tray up/down motor 2 (M19) of the
stacker
Description In the case that stack tray 2 full level sensor (S23) is OFF
of detection with the tray but without the dolly, although turning ON of
stack tray 2 full level sensor (S23) triggers to stop lowering
of the stack tray, it failed to be ON even though 30 sec has
passed.
Measures 1. Check the connector of the stack tray 2 full level sensor
(S23), and replace the sensor if necessary.
2. Replace the stack tray up/down motor 2 (M19).
3. Replace the slave controller PCB.
E580 8023 52 Title Error in lock of stack tray up/down motor 2 (M19) of the 2nd
stacker
Description In the case that stack tray 2 full level sensor (S23) is OFF
of detection with they tray but without the dolly, although turning ON of
stack tray 2 full level sensor (S23) triggers to stop lowering
of the stack tray, it failed to be ON even though 30 sec has
passed.
Measures 1. Check the connector of the stack tray 2 full level sensor
(S23), and replace the sensor if necessary.
2. Replace the stack tray up/down motor 2 (M19).
3. Replace the slave controller PCB.
E580 8024 51 Title Error in lock of stack tray up/down motor 2 (M19) of the
stacker
Description In the case of rising operation, although turning ON of
of detection flapping paper surface sensor 2 (S37) or stack tray paper
surface sensor front/rear (S44/43) triggers to stop rising of the
stack tray, it failed to be ON even though 30 sec has passed.
Measures 1. Check the connectors of flapping paper surface sensor 2
(S37) and the stack tray paper surface sensor front/rear
(S44/43), and replace the sensor(s) if necessary.
2. Replace the stack tray up/down motor 2 (M19).
3. Replace the slave controller PCB.
E580 8024 52 Title Error in lock of stack tray up/down motor 2 (M19) of the 2nd
stacker
Description In the case of rising operation, although turning ON of
of detection flapping paper surface sensor 2 (S37) or stack tray paper
surface sensor front/rear (S44/43) triggers to stop rising of the
stack tray, it failed to be ON even though 30 sec has passed.
Measures 1. Check the connectors of flapping paper surface sensor 2
(S37) and the stack tray paper surface sensor front/rear
(S44/43), and replace the sensor(s) if necessary.
2. Replace the stack tray up/down motor 2 (M19).
3. Replace the slave controller PCB.
7
Error Code > Error Code > Error Code Details
Description
7 Error Code > Error Code > Error Code Details
Detail
Code Location Item
Code
E580 8025 51 Title Error in lock of stack tray up/down motor 2 (M19) of the
stacker
Description Although entry of the encoder clock is checked at 100-msec
of detection intervals, the clock failed to be detected for 500 msec.
Measures 1. Check the connector of the stack tray 2 up/down clock
sensor (S25), and replace the sensor if necessary.
2. Replace the stack tray up/down motor 2 (M19).
3. Replace the slave controller PCB.
E580 8025 52 Title Error in lock of stack tray up/down motor 2 (M19) of the 2nd
stacker
Description Although entry of the encoder clock is checked at 100-msec
of detection intervals, the clock failed to be detected for 500 msec.
Measures 1. Check the connector of the stack tray 2 up/down clock
sensor (S25), and replace the sensor if necessary.
2. Replace the stack tray up/down motor 2 (M19).
3. Replace the slave controller PCB.
E580 8026 51 Title Error in lock of stack tray up/down motor 2 (M19) of the
stacker
Description In the case that the paper surface detection-monitoring is
of detection controlled, flapping paper surface sensor 1 (S30) or the stack
tray paper surface sensor front/rear (S44/43) failed to be OFF
even though 5 sec has passed.
Measures 1. Check the connector of the flapping paper surface sensor
1 (S30) and the stack tray paper surface sensor front/rear
(S44/43), and replace the sensor(s) if necessary.
2. Replace the stack tray up/down motor 1 (M20).
3. Replace the slave controller PCB.
E580 8026 52 Title Error in lock of stack tray up/down motor 2 (M19) of the 2nd
stacker
Description In the case that the paper surface detection-monitoring is
of detection controlled, flapping paper surface sensor 1 (S30) or the stack
tray paper surface sensor front/rear (S44/43) failed to be OFF
even though 5 sec has passed.
Measures 1. Check the connector of the flapping paper surface sensor
1 (S30) and the stack tray paper surface sensor front/rear
(S44/43), and replace the sensor(s) if necessary.
2. Replace the stack tray up/down motor 1 (M20).
3. Replace the slave controller PCB.
7-63
Description
7-63