Canon imagePRESS 1135 Series Service Manual page 879

Detail
Code Location Item
Code
E860 0001 21 Title Error in power cooling fan 1 (FM2)
Description Lock signal of power cooling fan 1 (FM2) is detected.
of detection
Measures 1. Check the connector of the power cooling fan 1 (FM2), and
replace the fan if necessary.
2. Replace the multi inserter controller PCB (PCB1).
E860 0002 11 Title Error in power cooling fan 2 (FM3)
Description Lock signal of power cooling fan 2 (FM3) is detected.
of detection
Measures 1. Check the connector of the power cooling fan 2 (FM3), and
replace the fan if necessary.
2. Replace the POD deck controller PCB (PCB1).
E860 0002 12 Title Error in power cooling fan 2 (FM3)
Description Lock signal of power cooling fan 2 (FM3) is detected.
of detection
Measures 1. Check the connector of the power cooling fan 2 (FM3), and
replace the fan if necessary.
2. Replace the POD deck controller PCB (PCB1).
E860 0002 13 Title Error in power cooling fan 2 (FM3)
Description Lock signal of power cooling fan 2 (FM3) is detected.
of detection
Measures 1. Check the connector of the power cooling fan 2 (FM3), and
replace the fan if necessary.
2. Replace the POD deck controller PCB (PCB1).
E860 0002 21 Title Error in power cooling fan 2 (FM3)
Description Lock signal of power cooling fan 2 (FM3) is detected.
of detection
Measures 1. Check the connector of the power cooling fan 2 (FM3), and
replace the fan if necessary.
2. Replace the multi inserter controller PCB (PCB1).
E860 0003 11 Title Error in power cooling fan 1 (FM2)
Description The lock status is released when the fan stops.
of detection
Measures 1. Check the connection/caught cable of the power cooling
fan 1 (FM2), and replace the fan if necessary.
2. Replace the POD deck controller PCB (PCB1).
E860 0003 12 Title Error in power cooling fan 1 (FM2)
Description The lock status is released when the fan stops.
of detection
Measures 1. Check the connection/caught cable of the power cooling
fan 1 (FM2), and replace the fan if necessary.
2. Replace the POD deck controller PCB (PCB1).
7
Error Code > Error Code > Error Code Details
Description
7 Error Code > Error Code > Error Code Details
Detail
Code Location Item
Code
E860 0003 13 Title Error in power cooling fan 1 (FM2)
Description The lock status is released when the fan stops.
of detection
Measures 1. Check the connection/caught cable of the power cooling
fan 1 (FM2), and replace the fan if necessary.
2. Replace the POD deck controller PCB (PCB1).
E860 0003 21 Title Error in power cooling fan 1 (FM2)
Description The lock status is released when the fan stops.
of detection
Measures 1. Check the connection/caught cable of the power cooling
fan 1 (FM2), and replace the fan if necessary.
2. Replace the multi inserter controller PCB (PCB1).
E860 0004 11 Title Error in power cooling fan 2 (FM3)
Description The lock status is released when the fan stops.
of detection
Measures 1. Check the connection/caught cable of the power cooling
fan 2 (FM3), and replace the fan if necessary.
2. Replace the POD deck controller PCB (PCB1).
E860 0004 12 Title Error in power cooling fan 2 (FM3)
Description The lock status is released when the fan stops.
of detection
Measures 1. Check the connection/caught cable of the power cooling
fan 2 (FM3), and replace the fan if necessary.
2. Replace the POD deck controller PCB (PCB1).
E860 0004 13 Title Error in power cooling fan 2 (FM3)
Description The lock status is released when the fan stops.
of detection
Measures 1. Check the connection/caught cable of the power cooling
fan 2 (FM3), and replace the fan if necessary.
2. Replace the POD deck controller PCB (PCB1).
E860 0004 21 Title Error in power cooling fan 2 (FM3)
Description The lock status is released when the fan stops.
of detection
Measures 1. Check the connection/caught cable of the power cooling
fan 2 (FM3), and replace the fan if necessary.
2. Replace the multi inserter controller PCB (PCB1).
E861 0001 11 Title Error in upper deck communication
Description Communication cannot be made between POD deck
of detection controller PCB (PCB1) and POD upper deck pickup drive
driver PCB (PCB36).
Measures 1. Replace the POD upper deck pickup drive driver PCB
(PCB601).
2. Replace the POD deck controller PCB (PCB1).
7-147
Description
7-147