Canon imagePRESS 1135 Series Service Manual page 157

2
Technology > Pickup / Feed System > Pick-up Area Control/Function > Auto Cassette Change Function
With auto cassette change function, the pickup source is switched according to the priority
order specified to each deck.
If the same media is set in all of the decks, the order is switched from the deck of the host
machine (priority order: 1) to the middle deck (priority order: 7) of the Secondary POD deck.
1
e.g.) when specifying the middle deck of the Secondary POD deck as the pickup source while
[Productivity Priority] is not selected:
Once the paper in the middle deck of the Secondary POD deck is out, the pickup source is
switched to the deck of the host machine. Subsequently, the paper source will be switched
in sequence up to the upper deck (priority order: 6) of the Secondary POD deck. Finally,
when there is no paper in the upper deck of the Secondary POD deck, the machine stops
pickup operation as well as activates the deck's paper supply LED.
1
2 Technology > Pickup / Feed System > Pick-up Area Control/Function > Auto Cassette Change Function
3 6
4 7
2 5
F-2-146
3 6
4 7
2 5
F-2-147
e.g.) when specifying the middle deck of the Secondary POD deck as the pickup source while
[Productivity Priority] is selected:
From the Secondary POD deck's middle deck to the lower deck (priority order: 5), the
pickup source is switched when there are approximately 100 sheets in each deck.
Although the pickup source is switched to the Secondary POD deck's upper deck (priority
order: 6), papers in other decks are not sufficient. Thus, the machine does not switch the
pickup source and continues pickup until the paper in the deck is out.
Subsequently, the pickup source is switched until the paper is out in respective deck
according to the priority order (1 > 2 > 3 > 4 > 5 > 7). (See the dotted line in the figure).
Finally, when there is no paper in the middle deck of the Secondary POD deck, the
machine stops pickup operation and activates the deck's paper supply LED.
1
Paper is picked up until they are used up when there are no decks available to switch even
if [Productivity Priority] is selected. Thus, you don't need to switch the mode when printing
less than 100 sheets.
2-109
3 6
4 7
2 5
F-2-148
2-109