Canon imagePRESS 1135 Series Service Manual page 53

2
Technology > Controller System > Overview > Product Configuration
■ Product Configuration
● Main Controller
[1-1] Network connector
[1-2] USB(device)
[1-3] USB(host)
[1-4] USB(host)
[14] Voice guidance PCB
[13] Main Controller PCB 1
[12] IPSec
Board-B1
[11] HDD Data Encryption
Kit-B7
[10] HDD
[9] BOOT ROM
2 Technology > Controller System > Overview > Product Configuration
[1] Main controller PCB 1
[2] SD-RAM
[3] Image PRESS Printer Kit-A1
[4] Expansion Bus-F1
[5] Reader Inter face PCB
[6] Main controller PCB 2
[7] SD-RAM
[8] System Upgrade RAM-B1
No. PCB name
[1] Main controller PCB 1
[1-1] Network connector
(10/100BASE-T/1000BASE-T*1)
[1-2] USB connector (device)
[1-3] USB connector (host)
[1-4] USB connector (host)
[1-5] Scanner PCB (Option)
[2] System processing SDRAM
[3] Imag PRESS Printer Kit-A1 (Option)
[4] Expantion Bus-F1 (Option)
[5] Reader Inter face PCB (Option)
[6] Main controller PCB 2
[7] Image processing SDRAM
[8] System Upgrade RAM-B1 (Option)
[9] BootROM
[10] HDD
[11] HDD Data Encryption kit-B7
[12] IPSec Securty Board-B1 (Option)
[13] Main controller PCB 1
[14] Voice Guidance PCB (Option)
F-2-7
Indicator Function
PCB34 System control/memory control
- Ethernet interface
*1: If using 1000BASE-T, use the twist pair
cable that supports the enhanced category
5 (CAT5e).
- USB 2.0 device I/F
- USB 2.0 host I/F
- USB 2.0 host I/F
- For reader image input processing. (For
color scan, additional SDRAM (1G) is
required.
- For temporary storage of system files.
Capacity: 512MB (with additional optional
-
memory, maximum 1G).
- Relay PCB between main controller PCB
and following PCBs. IPsec PCB.
- For reader image input processing. (For
color scan, additional SDRAM is required
(1G).
PCB35 For the control of printer output image
processing, JBIG/JPEG image data
compression/expansion.
- Temporary storage of image data. Capacity:
512MB (With additional optional memory,
-
maximum 1G)
- Storage for boot program of Sub CPU
(IC45).
- Storage for system software, Boot program
of main controller PCB1 CPU (ICxx), image
data, saving of BOX image data.
Capacity: 80GB
- Encryption of HDD stored data and
complete deletion of HDD remaining data.
- Encryption of internet protocol (IP) packet.
- System control/memory control
- Input/output voice data
2-5
T-2-4
2-5