Canon imagePRESS 1135 Series Service Manual page 710

USB device
3) If a twisted pair cross cable is connected to the machine, disconnect it.
4) Start the machine in appropriate download mode.
• In case of normal mode
While pressing 1 and 7 simultaneously, turn ON the main power switch.
After the machine starts up, select: COPIER > FUNCTION > SYSTEM > DOWNLOAD in
service mode and press [OK].
• In case of safe mode
While pressing 2 + 8 simultaneously, turn ON the main power switch.
See the following menu appearing on the control panel, indicating that the machine has
recognized the presence of a USB device (The figure represents the normal mode).
6
Troubleshooting > Version Upgrade > Making Preparations > Making Connections (USB device in use)
USB port
F-6-53
6 Troubleshooting > Version Upgrade > Making Preparations > Making Connections (USB device in use)
CAUTION :
The machine may not recognize a USB device depending on manufacturers or types.
This machine continues to search a USB device up to 60 sec at the maximum after
power-ON and if it cannot recognize anything, the foregoing menu will not be displayed.
If such is the case, obtain an appropriate USB device.
6-43
F-6-54
6-43