Canon imagePRESS 1135 Series Service Manual page 840

Detail
Code Location Item
Code
E602 0705 00 Title Error in the Hard Disc
Description The abnormality is in the /TMP_PSS.
of detection
Measures 1. Input the CHK-TYPE corresponds to the partition, input
CHK-TYPE, execute HDD-CLEAR, turn the main power
OFF/ON.
2. If the problem still persists, it is concluded that there is
trouble in the HDD, hence replace the HDD and re-install
the system.
E602 0710 00 Title Error in the Hard Disc
Description The abnormality is in the /TMP_PSS.
of detection
Measures Error caused by garbled data and software bug.
1. Activate using the save mode, re-install all the format and
system (SYSTEM, LANGUAGE, RUI) on the SST, turn the
main power OFF/ON.
2. If the problem still persists, it is concluded that there is
trouble in the HDD, hence replace the HDD and re-install
the system.
E602 0711 00 Title Error in the Hard Disc
Description The abnormality is in the /TMP_PSS.
of detection
Measures The error that does not occur in normal Read/Write level.
1. Check the cable and power connector, etc.
2. If the problem still persists, it is concluded that there is
trouble in the HDD, hence replace the HDD and re-install
the system.
E602 0712 00 Title Error in the Hard Disc
Description The abnormality is in the /TMP_PSS.
of detection
Measures Error caused by garbled data and software bug.
1. Activate using the save mode, re-install all the format and
system (SYSTEM, LANGUAGE, RUI) on the SST, turn the
main power OFF/ON.
2. If the problem still persists, it is concluded that there is
trouble in the HDD, hence replace the HDD and re-install
the system.
7
Error Code > Error Code > Error Code Details
Description
7 Error Code > Error Code > Error Code Details
Detail
Code Location Item
Code
E602 0713 00 Title Error in the Hard Disc
Description The abnormality is in the /TMP_PSS.
of detection
Measures High possibility that the document data of BOX etc, on the
HDD is broken.
1. Input the CHK-TYPE corresponds to the partition, execute
HDD-CHECK (required time : few minutes to several tens
minutes), and turn the power OFF/ON.
2. If the problem persists after the above is performed, input
the CHK-TYPE corresponds to the partition, execute the
HDD-CLEAR, and turn the main power OFF/ON.
(For BOOTDEV, BOOTDEV2, APL_SEND, re-format and
re-install in the SST)
3. If the problem still persists, it is concluded that there is
trouble in the HDD, hence replace the HDD and re-install
the system.
E602 0714 00 Title Error in the Hard Disc
Description The abnormality is in the /TMP_PSS.
of detection
Measures Error caused by garbled data and software bug.
1. Activate using the save mode, re-install all the format and
system (SYSTEM, LANGUAGE, RUI) on the SST, turn the
main power OFF/ON.
2. If the problem still persists, it is concluded that there is
trouble in the HDD, hence replace the HDD and re-install
the system.
E602 0721 00 Title Error in the Hard Disc
Description The abnormality is in the /TMP_PSS.
of detection
Measures The error that does not occur in normal Read/Write level.
1. Check the cable and power connector, etc.
2. If the problem still persists, it is concluded that there is
trouble in the HDD, hence replace the HDD and re-install
the system.
E602 0722 00 Title Error in the Hard Disc
Description The abnormality is in the /TMP_PSS.
of detection
Measures Error caused by garbled data and software bug.
1. Activate using the save mode, re-install all the format and
system (SYSTEM, LANGUAGE, RUI) on the SST, turn the
main power OFF/ON.
2. If the problem still persists, it is concluded that there is
trouble in the HDD, hence replace the HDD and re-install
the system.
7-108
Description
7-108