Points To Note When Using Service Mode; Service Mode Menu - Canon imagePRESS 1135 Series Service Manual

Hide thumbs Also See for imagePRESS 1135 Series:

Table of Contents

Instructions on how to use service mode items can be found within the service mode itself.

The information explains what items have been added or changed from previous models.

Points to note when using Service Mode

• When setting or executing in Service Mode, do not open or close the cover and turn off the

power while "active" is displayed. This may cause Service Mode to set incorrectly or fail to

• In service mode, it may list "Do not use this at the normal service." in "Points to Note when

Using". The followings indicate when this item should be used.

• The case when a setting value needs to be input on clearing RAM when replacing the

PCB (Clearly indicated in the use case)

• The case when instructed by the service office (due to reasons as having the large

negative effects, difficult settings, etc.)

• The case of performing the individual measure (due to the tender business, etc.)

Do not use in cases that are not mentioned above.

Service Mode > Overview > Service Mode Menu > Features

■ TOP Screen

A brand new additional mode in the host machine.

A function that can be used as a reference on how to use each item in

Service Mode is installed. The new function, which will be described

later, is available in MODELIST Mode.

"MODELIST CLASSIC"

This mode is same as the old machine. The new function, which will be

described later, is not available in the MODELIST CLASSIC Mode.

This is a new mode which has been added with this machine.

The service mode items are categorized according to purpose to improve searchability and

workability. Moreover, major troubleshooting procedures and remedies can be found in this

mode, without consulting manuals and FAQ.

Show Quick Links

Table of Contents