Canon imagePRESS 1135 Series Service Manual page 803

Detail
Code Location Item
Code
E5A9 8002 61 Title Error in the rotation motor 2 (M41) of the perfect binder
Description The rotation home position sensor 2 (S91) is not ON within
of detection some specified time during return to the home position.
Measures 1. Replace the rotation motor 2 (M41).
2. Replace the rotation home position sensor 2 (S91).
3. Replace the cutter controller PCB.
E5AA 0007 61 Title Error in the cutter motor (M35) of the perfect binder.
Description The cutter limit sensor (S86) is ON.
of detection
Measures 1. The trimmer moved to the limit position.
2. Replace the cutter motor (M35).
3. Replace the cutter limit sensor (S86).
4. Replace the cutter controller PCB.
E5AA 8001 02 Title Error in the cutter motor
Description The cutter motor clock sensor does not detect the home
of detection position of the trimming blade.
Measures 1. Check the connector of the cutter motor clock sensor
(S108), and replace the sensor if necessary.
2. Replace the cutter motor (M106).
3. Replace the trimmer controller PCB (PCB1).
E5AA 8001 61 Title Error in the cutter motor (M35) of the perfect binder.
Description The cutter area sensor 2 (S85) is not OFF within some
of detection specified time during cutting movement from the front side.
Measures 1. Replace the cutter motor (M35).
2. Replace the cutter area sensor 2 (S85).
3. Replace the cutter controller PCB.
E5AA 8002 02 Title Error in the cutter motor
Description The cutter motor clock sensor does not come off the home
of detection position of the trimming blade.
Measures 1. Check the connector of the cutter motor clock sensor
(S108), and replace the sensor if necessary.
2. Replace the cutter motor (M106).
3. Replace the trimmer controller PCB (PCB1).
E5AA 8002 61 Title Error in the cutter motor (M35) of the perfect binder.
Description The cutter area sensor 2 (S85) is not ON within some
of detection specified time during trimmer movement to the inner side
(cutting release).
Measures 1. Replace the cutter motor (M35).
2. Replace the cutter area sensor 2 (S85).
3. Replace the cutter controller PCB.
7
Error Code > Error Code > Error Code Details
Description
7 Error Code > Error Code > Error Code Details
Detail
Code Location Item
Code
E5AA 8003 02 Title Error in the cutter motor
Description The cutter motor clock sensor does not detect the motor
of detection clock.
Measures 1. Check the connector of the cutter motor clock sensor
(S108), and replace the sensor if necessary.
2. Replace the cutter motor (M106).
3. Replace the trimmer controller PCB (PCB1).
E5AA 8003 61 Title Error in the cutter motor (M35) of the perfect binder.
Description The cutter area sensor 2 (S85) is not OFF within some
of detection specified time during trimmer movement from the inner side.
Measures 1. Replace the cutter motor (M35).
2. Replace the cutter area sensor 2 (S85).
3. Replace the cutter controller PCB.
E5AA 8004 61 Title Error in the cutter motor (M35) of the perfect binder.
Description The cutter area sensor 2 (S85) is not ON within some
of detection specified time during trimmer movement to the front side
(cutting release).
Measures 1. Replace the cutter motor (M35).
2. Replace the cutter area sensor 2 (S85).
3. Replace the cutter controller PCB.
E5AA 8005 61 Title Error in the cutter motor (M35) of the perfect binder.
Description The cutter area sensor 1 (S84) is not ON within some
of detection specified time during trimmer movement from the front side to
the inner side.
Measures 1. Replace the cutter motor (M35).
2. Replace the area sensor 1 (S84).
3. Replace the cutter controller PCB.
E5AA 8006 61 Title Error in the cutter motor (M35) of the perfect binder.
Description The area sensor 1 (S84) is not ON within some specified
of detection time during trimmer movement from the inner side to the front
side.
Measures 1. Replace the cutter motor (M35).
2. Replace the area sensor 1 (S84).
3. Replace the cutter controller PCB.
E5AB 8001 61 Title Error in the binding lifter tray motor (M38) of the perfect
binder.
Description The binding lifter tray home position sensor (S79) is not OFF
of detection within some specified time when the binding lifter tray moves
from the home position.
Measures 1. Replace the binding lifter tray motor (M38).
2. Replace the binding lifter tray home position sensor (S79).
3. Replace the cutter controller PCB.
7-71
Description
7-71