Canon imagePRESS 1135 Series Service Manual page 802

Detail
Code Location Item
Code
E5A7 8022 02 Title The head-and-tail guide motor (M03) of the booklet trimmer is
remained at home position
Description The head-and-tail guide home position sensor (PI03) failed to
of detection be OFF
Measures 1. Check the connector.
2. Replace the sensor.
3. Replace the motor.
E5A7 8025 02 Title EEPROM error with the booklet trimmer
Description There is a failure with the numerical value for home position
of detection that has been saved
Measures Replacement of trimmer controller PCB
E5A7 8033 02 Title The driver with the trimming area feed motor (M04) of the
booklet trimmer is faulty
Description There was a failure in the trimming area feed motor driver
of detection PCB (A04)
Measures 1. Check the connector.
2. Replace the sensor.
3. Replace the motor.
E5A7 8043 02 Title The driver with the trimming motor (M05) of the booklet
trimmer is faulty
Description There was a failure in the trimming motor driver PCB (A05)
of detection
Measures 1. Replace the Trimming Motor Driver PCB.
2. Replace the Trimmer Controller PCB.
E5A7 8044 02 Title The upper limit is failed to be detected with the upper blade
of the booklet trimmer
Description The upper blade upper limit sensor (PI06) failed to be ON
of detection although the upper blade has moved for a certain distance
Measures 1. Check the Upper Blade Upper Limit Sensor (PI06).
2. Replace the Trimming Motor Driver PCB.
3. Replace the Trimmer Controller PCB.
E5A7 8051 02 Title The stopper shift motor (M06) of the booklet trimmer has not
been arrived at home position
Description The stopper home position sensor (PI05) failed to be ON
of detection
Measures 1. Remove any obstacles to movement of the stopper.
2. Check the Stopper Home Position Sensor (PI05).
3. Replace the Motor Driver PCB.
4. Replace the Trimmer Controller PCB.
E5A7 8052 02 Title The stopper shift motor (M06) of the booklet trimmer is
remained at home position
Description The stopper home position sensor (PI05) failed to be OFF
of detection
Measures 1. Check the Stopper Home Position Sensor (PI05).
2. Replace the Motor Driver PCB.
3. Replace the Trimmer Controller PCB.
7
Error Code > Error Code > Error Code Details
Description
7 Error Code > Error Code > Error Code Details
Detail
Code Location Item
Code
E5A7 8061 02 Title The conveyer retaining roller shift motor (M08) of the booklet
trimmer has not been arrived at home position
Description The retaining roller home position sensor (PI14) failed to be
of detection ON
Measures 1. Check the connector.
2. Replace the sensor.
3. Replace the motor.
E5A7 8062 02 Title The conveyer retaining roller shift motor (M08) of the booklet
trimmer is remained at home position
Description The retaining roller home position sensor (PI14) failed to be
of detection OFF
Measures 1. Check the connector.
2. Replace the sensor.
3. Replace the motor.
E5A7 8073 02 Title The driver with the main feed motor (M10) of the booklet
trimmer is faulty
Description There was a failure in the main feed motor driver PCB (A10)
of detection
Measures 1. Check the connector.
2. Replace the sensor.
3. Replace the motor.
E5A8 8001 61 Title Error in the rotation motor 2 (M42) of the perfection binder
(M42).
Description The rotation home position sensor1 (S95) is not OFF within
of detection some specified time during movement from the home
position.
Measures 1. Replace the rotation motor 1 (M42).
2. Replace the rotation home position sensor 1 (S95).
3. Replace the cutter controller PCB.
E5A8 8002 61 Title Error in the rotation motor 2 (M42) of the perfection binder
(M42).
Description The rotation home position sensor1 (S95) is not ON within
of detection some specified time during return to the home position.
Measures 1. Replace the rotation motor 1 (M42).
2. Replace the rotation home position sensor 1 (S95).
3. Replace the cutter controller PCB.
E5A9 8001 61 Title Error in the rotation motor 2 (M41) of the perfect binder
Description The rotation home position sensor 2 (S91) is not OFF
of detection within some specified time during movement from the home
position.
Measures 1. Replace the rotation motor 2 (M41).
2. Replace the rotation home position sensor 2 (S91).
3. Replace the cutter controller PCB.
7-70
Description
7-70