Canon imagePRESS 1135 Series Service Manual page 426

4
Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing Primary Charging Wire (right) Pad Holder
2) Remove the 2 screws and remove the shield plate (right).
x2
3) Pick the hook and turn it in the direction of the arrow to remove the pad holder of primary charging wire (right).
4 Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing Primary Charging Wire (right) Pad Holder
Shield plate (right)
F-4-308
Hook
Pad holder
Caution : Caution at installation
Make sure to push it until the pad holder of primary charging wire (right) is fixed by the
claw.
Pad holder
Claw
Hook
F-4-310
4-162
F-4-309
4-162