Canon imagePRESS 1135 Series Service Manual page 981

■ MISC
COPIER> DISPLAY> MISC
ENV-TR Display of device inside environment
Lv.1 Details Displaying environment in the device in the latest output.
Use case When checking the current installation environment of the host
machine.
Adj/set/operate method Select the item
Display/adjust/set range 0 to 7
LPOWER Display of laser light intensity
Lv.2 Details Displaying the laser power setting value during image formation in
the real time
To check if the laser power is different between the coated paper and
the plain paper.
Use case In the case of image fault
Adj/set/operate method Select the item
Display/adjust/set range 0 to 255
ENV-TR2 Dspl of environment at sec transfer ATVC
Lv.2 Details Displaying environment at the time of latest execution of the
secondary transfer ATVC control.
Use case When checking the current installation environment of the host
machine.
Adj/set/operate method Select the item
Display/adjust/set range 0 to 7
Related service mode COPIER> DISPLAY> MISC> ENV-TR
DEV-SP1 Device special setting 1: For R&D
DEV-SP2 Device special setting 2: For R&D
DEV-SP3 Device special setting 3: For R&D
DEV-SP4 Device special setting 4: For R&D
DEV-SP5 Device special setting 5: For R&D
DEV-SP6 Device special setting 6: For R&D
DEV-SP7 Device special setting 7: For R&D
DEV-SP8 Device special setting 8: For R&D
8
Service Mode > COPIER > DISPLAY (Status Display Mode) > ENVRNT
T-8-13
8 Service Mode > COPIER > DISPLAY (Status Display Mode) > ENVRNT
■ ENVRNT
COPIER> DISPLAY> ENVRNT
001 Dspl of environment log data No.1
Lv.1 Details Displaying the environment log data (inside temperature,
humidity, fixing roller temperature) No.1.
The machine saves the inside temperature(deg C), humidity(%)
and fixing roller temperature(deg C) that are calculated from
the detected results of environment sensor and the fixing main
thermistor as log data per 60 min.
Latest 13 logs are saved and when a new data is collected, the
earliest data will be deleted.
Use case When checking the inside environment of the host machine.
Adj/set/operate method Select the item
002 Dspl of environment log data No.2
Lv.1 Details Displaying the environment log data (inside temperature,
humidity, fixing roller temperature) No.2.
The machine saves the inside temperature(deg C), humidity(%)
and fixing roller temperature(deg C) that are calculated from
the detected results of environment sensor and the fixing main
thermistor as log data per 60 min.
Latest 13 logs are saved and when a new data is collected, the
earliest data will be deleted.
Use case When checking the inside environment of the host machine.
Adj/set/operate method Select the item
003 Dspl of environment log data No.3
Lv.1 Details Displaying the environment log data (inside temperature,
humidity, fixing roller temperature) No.3.
The machine saves the inside temperature(deg C), humidity(%)
and fixing roller temperature(deg C) that are calculated from
the detected results of environment sensor and the fixing main
thermistor as log data per 60 min.
Latest 13 logs are saved and when a new data is collected, the
earliest data will be deleted.
Use case When checking the inside environment of the host machine.
Adj/set/operate method Select the item
004 Dspl of environment log data No.4
Lv.1 Details Displaying the environment log data (inside temperature,
humidity, fixing roller temperature) No.4.
The machine saves the inside temperature(deg C), humidity(%)
and fixing roller temperature(deg C) that are calculated from
the detected results of environment sensor and the fixing main
thermistor as log data per 60 min.
Latest 13 logs are saved and when a new data is collected, the
earliest data will be deleted.
Use case When checking the inside environment of the host machine.
Adj/set/operate method Select the item
8-38
8-38