Canon imagePRESS 1135 Series Service Manual page 61

2
Technology > Controller System > Controls > Fan Control
■ Count Up Timing
Timing of count up differs depending on the delivery position of single/double-sided, installed
machine type.
1. Single-sided/2nd print of double-sided
Delivery location 1-sided/ 2nd side of 2-sided print 1st side of 2-sided print
Count-up timing (timing to advance the counter)
1 In the case of host machine only When the paper's trail edge passes
through delivery roller 3
Reference sensor: delivery sensor
3 (PS77)
2 Finisher Tray A When the paper's trail edge passes
Saddle finisher (upper tray) through the delivery roller
Reference sensor: upper delivery
sensor (PS5)
Tray B When the paper's trail edge passes
(lower tray) through the sort delivery roller
Reference sensor: lower delivery
sensor (PS6)
Saddle When the paper's trail edge passes
assembly through the saddle inlet feed roller
Reference sensor: saddle inlet
sensor (PS101)
3 Trimmer When the paper's trail edge passes
through the saddle inlet feed roller
Reference sensor: saddle inlet
sensor (PS101)
4 Stacker Delivery tray When the paper's trail edge passes
through the top tray eject roller
Reference sensor: top tray eject
sensor
Stack assembly When the paper's trail edge passes
through the stack tray eject roller
Reference sensor: stack tray eject
sensor
5 Perfect binder When the paper's trail edge passes
through the signature delivery
roller
Reference sensor: timing sensor
(S5)
2. 1st print of double-sided
When the duplexing feed sensor (PS91) is turned ON, the machine determines that the 1st
print of double-sided is complete and it is counted up.
2 Technology > Controller System > Controls > Fan Control
Print mode
When the paper's trail
edge passes through
duplex feed roller 8
Reference sensor: duplex
feed sensor 8 (PS91)
T-2-8
■ Fan Control
No. Name
FM1 Developing cooling fan
FM2 Pre-primary transfer suction fan
FM3 Primary suction fan
FM4 Primary exhaust fan
FM5 Developing assembly cooling
fan
FM8 Fixing assembly heat exhaust
fan 1
FM9 Fixing assembly heat exhaust
fan 2
FM10 Fixing sheet cooling fan 1
FM11 Fixing sheet cooling fan 2
FM13 Pre-fixing feed exhaust fan
FM14 Fixing sheet cooling fan 3
FM15 Power supply cooling fan 1
FM16 Power supply cooling fan 2
FM17 Controller cooling fan
FM18 Laser scanner cooling fan
FM19 Pre-fixing feed fan (front)
FM20 Pre-fixing feed fan (rear)
FM21 Internal delivery cooling fan
FM22 Pre-primary transfer exhaust fan To exhaust air around the
FM24 HDD cooling fan
2-13
Role Error Code
To cool the developing assembly E804-0001
To suction air around the primary E804-0002
transfer area
To suction air to the primary E804-0003
charging assembly
To exhaust air around the E804-0004
primary charging assembly
To cool the developing assembly E804-0005
To exhaust air around the fixing E804-0008
area
To exhaust air around the fixing E804-0009
area
To cool paper that passes E804-0010
through the external delivery
assembly
To cool paper that passes E804-0011
through the external delivery
assembly
To exhaust air in the pre-fixing E804-0013
feeding assembly
To cool paper that passes E804-0014
through the reversal assembly
To cool the power supply E804-0015
assembly
To cool the power supply E804-0016
assembly
To cool the main controller PCB -
To cool the laser scanner unit E804-0018
To cool the pre-fixing feed E804-0019
assembly
To cool the pre-fixing feed E804-0020
assembly
To cool paper that passes E804-0021
through the internal delivery
assembly
E804-0022
primary transfer area
To cool HDD -
2-13