Canon imagePRESS 1135 Series Service Manual page 968

COPIER> DISPLAY> ANALOG
MI1-TEMP Temperature of multi inserter storage
Lv.1 Details Displaying temperature in the deck of the multi insertion unit.
Measured by the environment sensor that detects the deck.
Use case When checking temperature in the deck.
Adj/set/operate method N/A (display only)
Unit Degree C
Appropriate target value 20 to 27
Related service mode COPIER> DISPLAY> ANALOG> DK1-TEMP, DK2-TEMP, DK3-
TEMP
DK3-TEMP Dspl of inside temperature of POD deck3
Lv.1 Details Displaying temperature inside the 2nd secondary POD deck storage.
Measured by the environment sensor (HS601) found at the upper
deck.
Use case When checking the temperature inside the storage.
Adj/set/operate method N/A (display only)
Unit Degree C
Appropriate target value 20 to 27
Related service mode COPIER> DISPLAY> ANALOG> DK1-TEMP, DK2-TEMP
DK3-HUM Dspl of inside humidity of POD deck3
Lv.1 Details Displaying humidity inside the 2nd secondary POD deck storage.
Measured by the environment sensor (HS601) found at the upper
deck.
Use case When checking the humidity inside the storage.
Adj/set/operate method N/A (display only)
Unit %
Appropriate target value 30 to 70
Related service mode COPIER> DISPLAY> ANALOG> DK1-HUM, DK2-HUM
8
Service Mode > COPIER > DISPLAY (Status Display Mode) > ANALOG
T-8-6
8 Service Mode > COPIER > DISPLAY (Status Display Mode) > ANALOG
8-25
8-25