Canon imagePRESS 1135 Series Service Manual page 51

2
Technology > Basic Configuration > Functional Configuration > Basic sequence
Period Definition
SREADY An interval in which the shading correction is executed after the Start
(Scanner Ready) key is pressed.
SSTBY An interval between the completion of the shading correction and
(Scanner Standby) switching the Start key ON / turning the main power OFF.
WMUP An interval in which the drive system stops, and it ends when the
(Warm-up) completion requirements of the fixing assembly startup is fulfilled.
WMUPR An interval in which the drive system starts, and the bias adjustment
(Warm-up Rotation) is executed.
PSTBY An interval in which the copy/print request signal can be accepted.
(Printer Standby)
2 Technology > Basic Configuration > Functional Configuration > Basic sequence
Definition
● Print sequence
• Reader
Start Key ON
SSTBY SREADY
Forwarding Backwarding
Reader Motor
Backwarding Forwarding
Scanning Lamp
HP Sensor
ON
Optical unit position
HP (Shading) Stream reading position
• Printer
POWER ON
PSTBY PINTR
Main heater(H2)
Fixing roller
Sub heater(H3)
Main heater(H8)
Pressure roller
Sub heater(H9)
Main heater(H4)
External heat
upper roller
Sub heater(H5)
Main heater(H6)
External heat
lower roller
Sub heater(H7)
Pressure roller motor (M10)
External heat engage/disnage Engage
motor (M12)
Fixing main motor (M11)
Period Definition
SREADY An interval in which the shading correction is executed after the Start
(Scanner Ready) key is pressed.
SSTBY An interval between the completion of the shading correction and
(Scanner Standby) switching the Start key ON / turning the main power OFF.
PSTBY An interval in which the copy / print request signal can be accepted.
(Print Standby State)
PRINTR An interval between the reception of the print request signal and the
(Printer Intial Rotation) state the image signal is sent.
PRINT An interval in which all toner is transferred on the paper, and the
paper is delivered.
LSTR An interval between the completion of the paper delivery and the stop
(Last Rotation) of all drives.
SCRW SCFW SSTBY
Backwarding Forwarding Forwarding
Forwarding
Backwarding
ON
End of the image
HP (Shading)
PRINT LSTR PSTBY
Engage disengage
disengage
Definition
2-3
F-2-4
F-2-5
2-3