Canon imagePRESS 1135 Series Service Manual page 821

Detail
Code Location Item
Code
E5D6 8001 61 Title Error in main grip motor (rear)(M24) on P-binder
Description When the main grip opens, the main grip open sensor (rear)
of detection (S47) does not come ON even though it is driven for the
specified time.
Measures 1. Replace the main grip motor (rear) (M24).
2. Replace the main grip open sensor (rear) (S47).
3. Replace the slave controller PCB.
E5D6 8002 61 Title Error in main grip motor (rear)(M24) on P-binder
Description When the main grip is closed, the main grip open sensor
of detection (rear)(S47) does not go OFF even though it is driven for the
specified time.
Measures 1. Replace the main grip motor (rear) (M24).
2. Replace the main grip open sensor (rear) (S47).
3. Replace the slave controller PCB.
E5D6 8003 61 Title Error in main grip motor (rear)(M24) on P-binder
Description When the main grip is closed, the main grip close sensor
of detection (rear)(S54) does not come ON even though it is driven for the
specified time.
Measures 1. Replace the main grip motor (rear) (M24).
2. Replace the main grip close sensor (rear) (S54).
3. Replace the slave controller PCB.
E5D6 8004 61 Title Error in main grip motor (rear)(M24) on P-binder
Description When the main grip is opened, the main grip close sensor
of detection (rear)(S54) does not go OFF even though it is driven for the
specified time.
Measures 1. Replace the main grip motor (rear) (M24).
2. Replace the main grip close sensor (rear) (S54).
3. Replace the slave controller PCB.
E5D6 8005 61 Title Error in main grip motor (rear)(M24) on P-binder
Description At the open/close operation of main grip, the signal of main
of detection grip encoder (rear)(S46) does not change even though it is
driven for the specified time.
Measures 1. Replace the main grip motor (rear) (M24).
2. Replace the main grip encoder (rear) (S46).
3. Replace the slave controller PCB.
E5D7 0006 61 Title Error in main grip motor (front)(M23) on P-binder
Description The main grip open sensor (front)(S51) and the main grip
of detection close sensor (front)(S53) come ON simultaneously.
Measures 1. Replace the main grip motor (front) (M23).
2. Replace the main grip open sensor (front) (S51).
3. Replace the main grip close sensor (front) (S53).
4. Replace the slave controller PCB.
7
Error Code > Error Code > Error Code Details
Description
7 Error Code > Error Code > Error Code Details
Detail
Code Location Item
Code
E5D7 8001 61 Title Error in main grip motor (front)(M23) on P-binder
Description When the main grip is opened, the main grip open sensor
of detection (front)(S51) does not come ON even though it is driven for
the specified time.
Measures 1. Replace the main grip motor (front) (M23).
2. Replace the main grip open sensor (front) (S51).
3. Replace the slave controller PCB.
E5D7 8002 61 Title Error in main grip motor (front)(M23) on P-binder
Description When the main grip is closed, the main grip open sensor
of detection (front)(S51) does not go OFF even though it is driven for the
specified time.
Measures 1. Replace the main grip motor (front) (M23).
2. Replace the main grip open sensor (front) (S51).
3. Replace the slave controller PCB.
E5D7 8003 61 Title Error in main grip motor (front)(M23) on P-binder
Description When the main grip is closed, the main grip close sensor
of detection (front)(S53) does not come ON even though it is driven for
the specified time.
Measures 1. Replace the main grip motor (front) (M23).
2. Replace the main grip close sensor (front) (S53).
3. Replace the slave controller PCB.
E5D7 8004 61 Title Error in main grip motor (front)(M23) on P-binder
Description When the main grip is opened, the main grip close sensor
of detection (front)(S53) does not go OFF even though it is driven for the
specified time.
Measures 1. Replace the main grip motor (front) (M23).
2. Replace the main grip close sensor (front) (S53).
3. Replace the slave controller PCB.
E5D7 8005 61 Title Error in main grip motor (front)(M23) on P-binder
Description At the open/close operation of main grip, the signal of main
of detection grip encoder (front)(S52) does not change even though it is
driven for the specified time.
Measures 1. Replace the main grip motor (front) (M23).
2. Replace the main grip encoder (front) (S52).
3. Replace the slave controller PCB.
E5D8 8001 61 Title Error in paper stack delivery path shift motor (M30) on
P-binder
Description When the paper stack delivery roller is released, the paper
of detection stack delivery path home position sensor (S67) does not
come ON even though it is driven for the specified time.
Measures 1. Replace the paper stack delivery path shift motor (M30).
2. Replace the paper stack delivery path home position
sensor (S67).
3. Replace the slave controller PCB.
7-89
Description
7-89