Transfer Charging Assembly; Removing The Transfer Charging Assembly - Canon NP7160 Service Manual

E. Transfer Charging
Assembly
1. Removing the Transfer Charging
Assembly
1) Open the copier top, and remove the front
door.
2) Pull the charging wire cleaning lever [1]
slightly to the front.
3) Remove the mounting screw [2], and lift
the stopper [3] to remove.
4) Pull the transfer charging assembly [4] to
the front to remove.
COPYRIGHT © 1998 CANON INC. CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
[4]
[1]
Figure 4-314
[3]
[2]
4–31