Removing Deck Pickup Solenoid - Canon imagePRESS 1135 Series Service Manual

4
Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing Deck Pickup Solenoid

Removing Deck Pickup Solenoid

<Preparation>
1) Pull out the Waste Toner Case Unit.
(Refer to page 4-56)
2) Pull Out Paper Deck.
(Refer to page 4-148)
3) Remove Pickup Unit.
(Refer to page 4-124)
2) Remove the deck pickup solenoid..
• 2 clamps
• 1 connector
• 2 screws
x2
x2
4 Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing Deck Pickup Solenoid
1) Removing the solenoid cover.
• 1 screw
Deck pickup solenoid
Solenoid cover
F-4-771
4-338
F-4-770
4-338