Canon imagePRESS 1135 Series Service Manual page 440

4
Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Replacing Primary Charging Wire (left)
13) Put the charging wire through under the groove.
15) Cut the extra charging wire with a nipper.
16) Put the charging wire through under the groove, pick the leading edge of spring with tweezers and hook it onto the hook.
Caution :
Make sure to hook the charging
wire on the indicated the groove
(grid side).
4 Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Replacing Primary Charging Wire (left)
Groove
Charging wire
F-4-345
Charging wire
14) After hooking the charging wire on the charging wire positioning on the rear of the primary
charging assembly, hook the charging wire torsion spring on the charging wire in the below
position and twist it.
Charging wire positioning
Charging wire torsion spring
Hook
Groove
Spring
F-4-347
Charging wire
(REAR) (FRONT)
F-4-346
Caution :
After hooking, make sure
that the charging assembly is
neither folded nor twisted.
4-176
4-176