Canon imagePRESS 1135 Series Service Manual page 820

Detail
Code Location Item
Code
E5D4 8005 61 Title Error in main grip up/down motor (M22) on P-binder
Description When the main grip is lowered to the cover sheet press
of detection position, the main grip pressure sensor (large)(S49) does not
come ON even though it is driven for the specified time.
Measures 1. Replace the main grip up/down motor (M22).
2. Replace the main grip pressure sensor (large) (S49).
3. Replace the slave controller PCB.
E5D4 8006 61 Title Error in main grip up/down motor (M22) on P-binder
Description When the main grip is lifted from the cover sheet press
of detection position, the main grip pressure sensor (large)(S49) does not
go OFF even though it is driven for the specified time.
Measures 1. Replace the main grip up/down motor (M22).
2. Replace the main grip pressure sensor (large) (S49).
3. Replace the slave controller PCB.
E5D4 8007 61 Title Error in main grip up/down motor (M22) on P-binder
Description When the paper stack is shifted from the main grip to the
of detection paper stack delivery roller, the paper stack delivery sensor
(S64T/S64L) does not come ON even though it is driven for
the specified time.
Measures 1. Replace the main grip up/down motor (M22).
2. Replace the paper stack delivery sensor (S64T/S64L).
3. Replace the slave controller PCB.
E5D4 8008 61 Title Error in main grip up/down motor (M22) on P-binder
Description When the main grip is lifted, the main grip home position
of detection sensor (H)(S45) does not come ON even though it is driven
for the specified time.
Measures 1. Replace the main grip up/down motor (M22).
2. Replace the main grip home position sensor (H) (S45).
3. Replace the slave controller PCB.
E5D4 8009 61 Title Error in main grip up/down motor (M22) on P-binder
Description When the main grip is lowered, the main grip home position
of detection sensor (H)(S45) does not go OFF even though it is driven for
the specified time.
Measures 1. Replace the main grip up/down motor (M22).
2. Replace the main grip home position sensor (H) (S45).
3. Replace the slave controller PCB.
7
Error Code > Error Code > Error Code Details
Description
7 Error Code > Error Code > Error Code Details
Detail
Code Location Item
Code
E5D5 0001 61 Title Error in rotation motor (M21) on P-binder
Description 1. When the main grip rotates to the paper shift position, the
of detection rotation home position sensor (S43) does not come ON
even though it is driven for the specified time.
2. When the paper presence is detected under the other
condition than the sub grip being in the home position, the
main grip does not exist in the rotation home position.
Measures 1. Remove the paper stack stationary on sub grip area.
2. Replace the rotation motor (M21).
3. Replace the rotation home position sensor (S43).
4. Replace the slave controller PCB.
E5D5 0002 61 Title Error in rotation motor (M21) on P-binder
Description When the main grip rotates to the booklet position, the
of detection rotation home position sensor (S43) does not go OFF even
though it is driven for the specified time.
Measures 1. Replace the rotation motor (M21).
2. Replace the rotation home position sensor (S43).
3. Replace the slave controller PCB.
E5D5 0003 61 Title Error in rotation motor (M21) on P-binder
Description When the main grip rotates to the booklet position, the
of detection rotation booklet position sensor (S42) does not come ON
even though it is driven for the specified time.
Measures 1. Replace the rotation motor (M21).
2. Replace the rotation booklet position sensor (S42).
3. Replace the slave controller PCB.
E5D5 0004 61 Title Error in rotation motor (M21) on P-binder
Description When the main grip rotates to the paper shift position, the
of detection rotation booklet position sensor (S42) does not go OFF even
though it is driven for the specified time.
Measures 1. Replace the rotation motor (M21).
2. Replace the rotation booklet position sensor (S42).
3. Replace the slave controller PCB.
E5D5 0005 61 Title Error in rotation motor (M21) on P-binder
Description The rotation booklet position sensor (S42) and the rotation
of detection home position sensor (S43) come ON simultaneously.
Measures 1. Replace the rotation motor (M21).
2. Replace the rotation booklet position sensor (S42).
3. Replace the rotation home position sensor (S43).
4. Replace the slave controller PCB.
E5D6 0006 61 Title Error in main grip motor (rear)(M24) on P-binder
Description The main grip open sensor (rear)(S47) and the main grip
of detection close sensor (rear)(S54) come ON simultaneously.
Measures 1. Replace the main grip motor (rear) (M24).
2. Replace the main grip open sensor (rear) (S47).
3. Replace the main grip close sensor (rear) (S54).
4. Replace the slave controller PCB.
7-88
Description
7-88