Setting Up The Network - Canon imagePRESS 1135 Series Service Manual

2
Technology > MEAP > Setting Up the Network

Setting Up the Network

To allow a MEAP device to accept accesses through the network, for example you operate
a device with SMS, the On option must be selected on Use HTTP screen. The option is
selected by default. The setting can be changed on the control panel of the MEAP device.
1) Make the following selections: [Additional Functions] button > [System Settings] button >
(Down-arrow) button.
NOTE:
If the System manager ID and system password have already been assigned, ID Entry
dialog appears after System Settings button is pressed. Enter the system manager ID
and the password, and click ID key to go into System Management Mode.
2) Make the following selections: [MEAP Settings] button > [Use HTTP] button> [On] button >
[OK] button .
2 Technology > MEAP > Setting Up the Network
NOTE:
When using SSL, set [Use SSL] ON.
(This setting is also applied to the SSL setting of RUI. Same is true in the case of
setting SSL ON on the side of RUI.)
Setting [Use SSL] ON displays the message dialogue 'Changes effective after the main
power switch is turned OFF and ON' . Press [OK].
3) Press Done button as many times as necessary until the Basic screen appears.
4) Restart the device.
CAUTION:
• The setting [Use HTTP] is not actually enabled/disabled until you have restarted the
device.
• You cannot make a connection through a proxy server. If a proxy server is in use,
enter the IP address of the MEAP device in the Exceptions field for the browser.
F-2-200
Open Internet Options dialog of Internet Explorer and select Connections tab, LAN
Settings button, Use a proxy server option, and Advanced button of Proxy server
group. Proxy Settings dialog will opens. The Exceptions field is in the dialog. As
network settings vary among environments, consult the network administrator. - If
Cookie and JavaScript are not enabled in the Web browser, you will not be able to
use SMS.
• To type text using the Web browser, use the characters compatible with the MEAP
device's touch panel display. The MEAP device may not properly recognize some
characters.
• When [se SSL] is made available, it is necessary to set the key and the certificate
necessary for the SSL communication. Set the key and the certificate by SSL with
F-2-201 [Certificate Settings] that exists in [System Settings] > [Network Settings] > [TCP/IP
Settings] on the iR device.
2-143
F-2-202
2-143