Canon imagePRESS 1135 Series Service Manual page 755

Detail
Code Location Item
Code
E260 0104 05 Title Fixing main driver PCB 24V error (supported by DC Controller
Ver 49.04 or later)
Description When checking the power supply detection port at intervals
of detection of 100 msec at power-on, an error was detected 5 times in
a row (excluding the case where the Front Door is open/unit
has been removed).
When checking the power supply error detection port at
intervals of 100 msec at the time that an error was detected
in the Fan Motor, an error was detected more than 5 times
out of 10 (excluding the case where the Front Door is open/
unit has been removed).
Measures 1. Check the connector (J800)/harnesses of the Fixing main
driver PCB (PCB8).
2. Check the connectors (J1102, J1121)/harnesses of the
Power relay PCB (PCB14).
3. Check the connectors (J1472, J1514)/harnesses of the24V
power PCB (1) (PCB18).
E260 0105 05 Title Developing driver PCB 24V error (supported by DC Controller
Ver 49.04 or later)
Description When checking the power supply detection port at intervals
of detection of 100 msec at power-on, an error was detected 5 times in
a row (excluding the case where the Front Door is open/unit
has been removed).
When checking the power supply error detection port at
intervals of 100 msec at the time that an error was detected
in the Fan Motor, an error was detected more than 5 times
out of 10 (excluding the case where the Front Door is open/
unit has been removed).
Measures 1. Check the connector (J900)/harnesses of the Developing
driver PCB (PCB5).
2. Check the connectors (J1105, J1123)/harnesses of the
Power relay PCB (PCB14).
3. Check the connectors (J1476, J1516)/harnesses of the
24V power PCB (3) (PCB20).
7
Error Code > Error Code > Error Code Details
Description
7 Error Code > Error Code > Error Code Details
Detail
Code Location Item
Code
E260 0106 05 Title DC controller PCB 24V error (supported by DC Controller Ver
49.04 or later)
Description When checking the power supply detection port at intervals
of detection of 100 msec at power-on, an error was detected 5 times in
a row (excluding the case where the Front Door is open/unit
has been removed).
When checking the power supply error detection port at
intervals of 100 msec at the time that an error was detected
in the Fan Motor, an error was detected more than 5 times
out of 10 (excluding the case where the Front Door is open/
unit has been removed).
Measures 1. Check the connector (J261)/harnesses of the DC controller
PCB (PCB1).
2. Check the connectors (J708, J710)/harnesses of the
LASER INTERFACE PCB ASSEMBLY (PCB11).
3. Check the connectors (J1108, J1123)/harnesses of the
Power relay PCB (PCB14).
4. Check the connectors (J1476, J1516)/harnesses of the
24V power PCB (3) (PCB20).
E260 0107 05 Title Registration/duplexing driver PCB 24R error (supported by
DC Controller Ver 49.04 or later)
Description When checking the power supply detection port at intervals
of detection of 100 msec at power-on, an error was detected 5 times in
a row (excluding the case where the Front Door is open/unit
has been removed).
When checking the power supply error detection port at
intervals of 100 msec at the time that an error was detected
in the Fan Motor, an error was detected more than 5 times
out of 10 (excluding the case where the Front Door is open/
unit has been removed).
Measures 1. Check the connector (J310)/harnesses of the Registration/
duplexing driver PCB (PCB4).
2. Check the connectors (J1104, J1123)/harnesses of the
Power relay PCB (PCB14).
3. Check the connectors (J1476, J1516)/harnesses of the
24V power PCB (3) (PCB20).
7-23
Description
7-23