Canon imagePRESS 1135 Series Service Manual page 721

2) Click [Execute Clear] so that the system software that has been stored in the
temporary storage area of the HDD will be removed.
Message
Do you want to clear whole firmware
downloaded to the machine?
Execute Clear
3) Click [OK]. Return to the previous page.
Message
The downloaded firmware has been deleted.
6) Start up the machine. The subsequent procedure differs depending on the download mode.
• If the machine is in normal mode
6-1) Click [Shutdown].
ServiceSupportTool DLM10 (Ver. X.XX E)
SelectableFirmware
Control
Select the firmware to be downloaded, Click the button of the task to be
then click the [Start] button.
executed.
SelectableFirmware
iPR1135
Download Firmware
ASR
BROWSER
DCON
HELP
LANGUAGE
MEAPCONT
XXxxvXXXX
MEDIA
Restore Backup System
RCON
RUI
SYSTEM
TTS
WebDAV
Return to Main Menu
6
Troubleshooting > Version Upgrade > Downloading System Software > Downloading Procedure (Single)
Cancel
F-6-84
O K
F-6-85
172.16.1.100
iPR1135
NORMAL
C l e a r
RCON
XXxxXXXX
RUI
XXenXXXX
MEAPCONT
XXxxXXXX
LANGUAGE
XXjaXXXX
Upload Data XXenXXXX
SDICT
XXjaXXXX
Download Data
BOOT
XXxxXXXX
TTS
XXjaXXXX
XXenXXXX
BROWSER
Format HDD
XXxxXXXX
HELP
XXxxXXXX
Start
WEBDAV
XXxxXXXX
ASR
XXjaXXXX
Shutdown
XXenXXXX
MEDIA
XXjaXXXX
XXenXXXX
F-6-86
6 Troubleshooting > Version Upgrade > Downloading System Software > Downloading Procedure (Single)
6-2) Click [Start Shutdown] so that the machine starts the shut-down sequence.
The main power switch turns OFF automatically.
Message
Have you finished downloading and want to start
shutdown sequence for restarting machine ?
Start Shutdown
6-3) Click [OK].
Message
Follow the instructions shown on the machine for
shutdown process.
Click [OK] button to return to Main Menu.
6-4) Turn on the machine's main power switch.
The downloaded system software is written to HDD or flash ROM.
After writing is complete, the message that prompts the shutdown is displayed on the
control panel.
• If the machine is in safe mode
6-1) After 10 sec from when the main power switch of the machine turns OFF, turn ON
the main power switch.
The downloaded system software is written to HDD or flash ROM.
After writing is complete, the message that prompts the shutdown is displayed on the
control panel.
7) Press reset key.
The main power switch turns OFF automatically.
8) After 10 sec from the power OFF, turn ON the main power switch.
Cancel
F-6-87
O K
F-6-88
6-54
6-54