Canon imagePRESS 1135 Series Service Manual page 965

COPIER> DISPLAY> ACC-STS
SEND Dspl of existance of SEND support PCB
Lv.1 Details To display if there is PCB to support SEND function.
SEND function can be used only when the PCB is mounted.
Use case When checking connection between the host machine and the PCB
that supports SEND function.
Adj/set/operate method N/A (display only)
Display/adjust/set range 0 to 1
0: (PCB is) not mounted, 1: (PCB is ) mounted
TRIM-CN Dspl of trimmer connection status
Lv.1 Details Displaying connecting status of the trimmer.
Use case When checking the conection between the host machine and the
trimmer.
Adj/set/operate method N/A (display only)
Display/adjust/set range 0 to 1
0: no connection, 1: connected (active)
PDL-FNC1 Dspl of active PDL function 1
Lv.1 Details Displaying active/invalid state of PDL function in bit row.
Invalid if the corresponding bit (for each function) is 0, active if the
corresponding bit is 1
Use case When displaying the available PDL on the machine.
Adj/set/operate method N/A (display only)
Display/adjust/set range 0000 0000 0000 0000 to 1111 1111 1111 1111
0: Invalid, 1: Active
bit31: BDL
bit30: PS
bit29: PCL
bit28: PDF
bit27: LIPS(LIPS/LX emulation)
bit26: N201(LIPS/LX emulation)
bit25: I5577(LIPS/LX emulation)
bit24: ESC/P (LIPS/LX emulation)
bit23: HPGL(LIPS/LX emulation)
bit22: HPCL2(LIPS/LX emulation)
PDL-FNC2 Dspl of active PDL function 2
Lv.1 Details Displaying active/invalid state of PDL function in bit row.
Invalid if the corresponding bit (for each function) is 0, active if the
corresponding bit is 1
Use case When displaying the available PDL on the machine.
Adj/set/operate method N/A (display only)
Display/adjust/set range 0000 0000 0000 0000 to 1111 1111 1111 1111
0: Invalid, 1: Active
b15 to b0: Reserve (to be used when PDL is newly added)
HDD Display of HDD model name
Lv.1 Details Displaying the model name of HDD.
Use case When checking model name of HDD used with the host machine.
Adj/set/operate method N/A (display only)
8
Service Mode > COPIER > DISPLAY (Status Display Mode) > ACC-STS
8 Service Mode > COPIER > DISPLAY (Status Display Mode) > ACC-STS
COPIER> DISPLAY> ACC-STS
PCI1 Display of PCI1 connected PCB
Lv.1 Details Displaying name of the PCB that connects to PCI1.
Check that the PCB name is properly displayed.
Use case When checking name of the PCB that connects to PCI1.
Adj/set/operate method N/A (display only)
Display/adjust/set range -: No connecting PCB
Voice Board: Voice PCB
3DES Board: Encryption PCB
1Gbit-Board: Giga Ethernet PCB
PCI2 Display of PCI2 connected PCB
Lv.1 Details Displaying name of the OCB that connects to PCI2.
Check that the PCB name is properly displayed.
Use case When checking name of the PCB that connects to PCI2.
Adj/set/operate method N/A (display only)
Display/adjust/set range -: No connecting PCB
iSLOT: iSLOT wireless LAN PCB
Voice Board: Voice PCB
Voice Board R: Voice recognition PCB (hidden display with this
equipment)
3DES Board: Encryption PCB
1Gbit-Board: Giga Ethernet PCB
PCI3 Display of PCI3 connected PCB
Lv.1 Details Displaying name of the PCB that connects to PCI3.
Check that the PCB name is properly displayed.
Use case When checking name of the PCB that connects to PCI3.
Adj/set/operate method N/A (display only)
Display/adjust/set range -: No connecting PCB
iSLOT: iSLOT wireless LAN PCB
Voice Board: Voice PCB
Voice Board R: Voice recognition PCB (hidden display with this
equipment)
3DES Board: Encryption PCB
1Gbit-Board: Giga Ethernet PCB
IA-RAM Dspl of memory(IA) capacity of MNCON PCB
Lv.1 Details Displaying memory (IA) capacity on the main controller PCB.
Use case When checking memory capacity on the main controller PCB.
Adj/set/operate method N/A (display only)
Unit MB
Default value 512
8-22
T-8-5
8-22