Remove Pressure Roller Main Thermistor - Canon imagePRESS 1135 Series Service Manual

4
Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Remove Pressure Roller Main Thermistor

Remove Pressure Roller Main Thermistor

<Preparation>
1) Open the Front Left Cover and the Front Right
Cover.
(Refer to page 4-54)
2) Pull Out Fixing Feed Unit.
(Refer to page 4-120)
3) Caution about the Disassembly of Fixing
Assembly.
(Refer to page 4-96)
4) Open Fixing Upper Unit.
(Refer to page 4-98)
5) Remove Pressure Roller Unit.
(Refer to page 4-116)
6) Caution about the thermistor/thermo switch.
(Refer to page 4-97)
3) Remove the harness from the harness guide.
4 Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Remove Pressure Roller Main Thermistor
1) Remove the connector and shift the main thermistor release lever in the direction of the arrow.
2) Remove the 2 pins on the pressure roller main thermistor unit and remove the pressure roller main thermistor unit from the fixing assembly.
Connector
Main thermistor release lever
Harness Harness guide
Pressure roller
Pin
main thermistor
4-287
F-4-636
F-4-637
4-287