Canon imagePRESS 1135 Series Service Manual page 801

Detail
Code Location Item
Code
E5A3 8082 61 Title Error in the loading buffer tray motor of the perfect binder
(M39)
Description The loading buffer tray home position sensor (S78) is not
of detection ON within some specified time. When The loading buffer tray
returns to the home position.
Measures 1. Replace the loading buffer tray motor (M39).
2. Replace the loading buffer tray home position sensor (S78).
3. Replace the cutter controller PCB.
E5A4 0085 61 Title Error in the press motor (M36) of the perfect binder
Description The press limit sensor (S89) is ON.
of detection
Measures 1. The press plate moved until press release limit position.
2. Replace the press motor (M36).
3. Replace the press limit sensor (S89).
4. Replace the cutter controller PCB.
E5A4 8001 02 Title Error in the press motor
Description The press motor HP sensor does not turn ON.
of detection
Measures 1. Check the connector of the press motor HP sensor (S106),
and replace the sensor if necessary.
2. Replace the press motor (M105).
3. Replace the trimmer controller PCB (PCB1).
E5A4 8002 02 Title Error in the press motor
Description The press motor HP sensor does not turn OFF.
of detection
Measures 1. Check the connector of the press motor HP sensor (S106),
and replace the sensor if necessary.
2. Replace the press motor (M105).
3. Replace the trimmer controller PCB (PCB1).
E5A4 8081 61 Title Error in the press motor (M36) of the perfect binder
Description The press home position sensor (S90) is not OFF within
of detection some specified time during press movement.
Measures 1. Replace the press motor (M36).
2. Replace the press home position sensor (S90).
3. Replace the cutter controller PCB.
E5A4 8082 61 Title Error in the press motor (M36) of the perfect binder
Description The press home position sensor (S90) is not ON within some
of detection specified time during press release.
Measures 1. Replace the press motor (M36).
2. Replace the press home position sensor (S90).
3. Replace the cutter controller PCB.
7
Error Code > Error Code > Error Code Details
Description
7 Error Code > Error Code > Error Code Details
Detail
Code Location Item
Code
E5A4 8083 61 Title Error in the press motor (M36) of the perfect binder
Description The press end sensor (S87) is not OFF within some specified
of detection time during press release.
Measures 1. Replace the press motor (M36).
2. Replace the press end sensor (S87).
3. Replace the cutter controller PCB.
E5A4 8084 61 Title Error in the press motor (M36) of the perfect binder
Description The press end sensor (S87) is not ON within some specified
of detection time during the press movement.
Measures 1. Replace the press motor (M36).
2. Replace the press end sensor (S87).
3. Replace the cutter controller PCB.
E5A5 8081 61 Title Error in the slide motor M44) of the perfect binder
Description The slide home position sensor (S82) is not OFF within some
of detection specified time when The slide moves from the home position.
Measures 1. Replace the slide motor (M44).
2. Replace the slide home position sensor (S82).
3. Replace the cutter controller PCB.
E5A5 8082 61 Title Error in the slide motor (M44) of the perfect binder
Description The slide home position sensor (S82) is not ON after within
of detection specified time when The slide returns to the home position.
Measures 1. Replace the slide motor (M44).
2. Replace the slide home position sensor (S82).
3. Replace the cutter controller PCB.
E5A7 8011 02 Title The feeding claw operating motor (M02) of the booklet
trimmer has not been arrived at home position.
Description The feeding claw home position sensor (PI04) failed to be ON
of detection
Measures 1. Check the connector.
2. Replace the sensor.
3. Replace the motor.
E5A7 8012 02 Title The feeding claw operating motor (M02) of the booklet
trimmer is remained at home position.
Description The feeding claw home position sensor (PI04) failed to be
of detection OFF
Measures 1. Check the connector.
2. Replace the sensor.
3. Replace the motor.
E5A7 8021 02 Title The head-and-tail guide motor (M03) of the booklet trimmer
has not been arrived at home position
Description The head-and-tail guide home position sensor (PI03) failed to
of detection be ON
Measures 1. Check the connector.
2. Replace the sensor.
3. Replace the motor.
7-69
Description
7-69