Canon imagePRESS 1135 Series Service Manual page 48

1
Product Overview > Operation > Additional Function Mode (Mode for User Administrator)
● Adjustment/Cleaning
Item
Zoom Fine Adjustment*1 X, Y: -1.0% to +1.0%, in 0.1% increments; (0.0%)
Saddle Stitch Position Adjustment*1 All paper sizes: -2.00 mm to +2.00 mm, in 0.25 mm
increments; (0.0 mm)
Saddle Stitch Fold Placement Placement: -2.00 mm to +2.00 mm, in 0.25 mm increments; (0.0
Adjustment*1 mm)
Double Staple Space Adjustment*1 4 3/4" to 5 7/8" (120 mm to 150 mm), 4 3/4" (120 mm)
Trim Width Adjustment*1 0.08" to 0.78" (2.0 mm to 20.0 mm), in 0.01" (0.1 mm)
increments; 0.08" (2.0 mm)
Perfect Binding Finishing Size Fine Horizontal:
Adjustment*1
-0.02" to 0.04" (-0.5 mm to 0.5 mm), in 0.01" (0.1 mm)
increments; 0.00" (0.0 mm)
Vertical (Top + Bottom):
-0.04" to 0.04" (-1.0 mm to 1.0 mm), in 0.01" (0.1 mm)
increments; 0.00" (0.0 mm)
Fold Placement Adjustment*1 Saddle Fold Placement Adjustment
-8.50mm to +8.50mm, in 0.25mm increments; (0.00mm)
C-Fold Placement Adjustment
-7.0mm to +5.0mm, in 0.5mm increments; (-1.0mm)
Z-Fold Placement Adjustment
-2.0mm to +1.5mm, in 0.5mm increments; (0.0m)
Accordion Z-Fold Placement Adjustment
-7.0mm to +5.0mm, in 0.5mm increments; (-1.0mm)
Half Fold Placement Adjustment
-2.0mm to +2.0mm, in 0.5mm increments; (0.0m)
Double Parallel Fold Placement Adjustment*5
A: -2.0 mm to +5.0 mm, in 0.5 mm increments; (-1.0 mm)
B: 0.0 mm to +5.0 mm, in 0.5 mm increments; (1.0 mm)
Auto Gradation Adjustment*1 Full Adjust, Quick Adjust
Exposure Recalibration*1 Copy/Inbox, (Send): Light, Dark: 1 to 9 (levels; 5)
Feeder Cleaning*1 Press [Start]
Wire Cleaning Press [Start]
Original Scanning Area Cleaning Follow the instructions on the screen
Method*1
Curl Correction for Each Paper Settings
Source
Face Up Output: -15 to +15, (0)
Face Down Output: -15 to +15, (0)
*1. Displayed only when Option is connected.
1 Product Overview > Operation > Additional Function Mode (Mode for User Administrator)
Settings
T-1-31
1-33
1-33