Canon imagePRESS 1135 Series Service Manual page 825

Detail
Code Location Item
Code
E5F8 8001 02 Title Error in the saddle tapping motor
Description Although the saddle tapping motor is driven for 50 pulses, the
of detection tapping plate cannot be detected by the saddle paper tapping
HP sensor.
Measures 1. Check the connectors of the saddle paper tapping HP
sensor (S215) and the saddle tapping motor (M213).
2. Check the connection of the saddle paper tapping HP
sensor (S215) and the saddle tapping motor (M213)
harnesses.
3. Replace the saddle paper tapping HP sensor (S215).
4. Replace the saddle tapping motor (M213).
5. Replace the saddle stitcher controller PCB.
6. Replace the finisher controller PCB.
E5F8 8002 02 Title Error in the saddle tapping motor
Description Although the saddle tapping motor is driven for 50 pulses, the
of detection tapping plate cannot move from the CLOSE position of the
saddle paper tapping HP sensor.
Measures 1. Check the connectors of the saddle paper tapping HP
sensor (S215) and the saddle tapping motor (M213).
2. Check the connection of the saddle paper tapping HP
sensor (S215) and the saddle tapping motor (M213)
harnesses.
3. Replace the saddle paper tapping HP sensor (S215).
4. Replace the saddle tapping motor (M213).
5. Replace the saddle stitcher controller PCB.
6. Replace the finisher controller PCB.
E5F9 8001 02 Title Error in the saddle lead-in roller disengage motor
Description Although the saddle lead-in roller disengage motor is driven
of detection for 50 pulses, the saddle lead-in roller cannot be detected by
the saddle lead-in roller HP sensor.
Measures 1. Check the connectors of the saddle lead-in roller HP
sensor (S222) and the saddle lead-in roller disengage
motor (M214).
2. Check the connection of the saddle lead-in roller HP
sensor (S222) and the saddle lead-in roller disengage
motor (M214) harnesses.
3. Replace the saddle lead-in roller HP sensor (S222).
4. Replace the saddle lead-in roller disengage motor (M214).
5. Replace the saddle stitcher controller PCB.
6. Replace the finisher controller PCB.
7
Error Code > Error Code > Error Code Details
Description
7 Error Code > Error Code > Error Code Details
Detail
Code Location Item
Code
E5F9 8002 02 Title Error in the saddle lead-in roller disengage motor
Description Although the saddle lead-in roller disengage motor is driven
of detection for 50 pulses, the saddle lead-in roller cannot move from the
CLOSE position of the saddle lead-in roller HP sensor.
Measures 1. Check the connectors of the saddle lead-in roller HP
sensor (S222) and the saddle lead-in roller disengage
motor (M214).
2. Check the connection of the saddle lead-in roller HP
sensor (S222) and the saddle lead-in roller disengage
motor (M214) harnesses.
3. Replace the saddle lead-in roller HP sensor (S222).
4. Replace the saddle lead-in roller disengage motor (M214).
5. Replace the saddle stitcher controller PCB.
6. Replace the finisher controller PCB.
E5FA 8000 02 Title Error in saddle press
Description Saddle press position sensor does not come ON within 200
of detection msec after the saddle press motor starts operation.
Measures 1. Replacement of saddle press motor and saddle press
position sensor
2. Replacement of stitcher controller PCB
E5FA 8002 02 Title Error in saddle press
Description Saddle press HP sensor does not come ON within 1 sec after
of detection the saddle press motor starts operation.
Measures 1. Replacement of saddle press motor and saddle press
position sensor
2. Replacement of stitcher controller PCB
E5FA 8002 02 Title Error in saddle press
Description Saddle press HP sensor does not go OFF within 1 sec after
of detection the saddle press motor starts operation.
Measures 1. Replacement of saddle press motor and saddle press
position sensor
2. Replacement of stitcher controller PCB
E5FB 8001 02 Title Error in saddle disengage operation
Description Saddle lead-in roller HP sensor does not come ON within
of detection 5 sec after the saddle lead-in roller disengage motor starts
operation.
Measures 1. Check the connectors of the saddle lead-in roller disengage
motor and the saddle lead-in roller HP sensor, and replace
the motor/the sensor if necessary.
2. Replace the stitcher controller PCB.
7-93
Description
7-93