Canon imagePRESS 1135 Series Service Manual page 556

4
Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing Fixing Refresh Roller
2) Insert the positioning pin packaged together with the new fixing refresh roller to the pinhole of the fixing refresh roller right edge assembly.
MEMO :
There are 1 large and 1 small hole to insert the pin. Be sure to insert the
fixing pin into the large hole.
4 Parts Replacement and Cleaning > Periodic Replacing Parts, Durable Parts, Cleaning Parts > Removing Fixing Refresh Roller
3) Remove the D cut [B] part of the gear in the direction of the arrow, after adjusting it to the D cut [A]
part of the bearing retainer.
Large hole
F-4-647
Positioning
pin
Pinhole
F-4-646
[A]
4-292
[B]
F-4-648
4-292