Canon imagePRESS 1135 Series Service Manual page 715

■ Downloading Procedure (Assist mode)
1) Start the machine in safe mode. (While pressing 2 + 8, turn ON the main power switch.)
2) Start up the SST.
3) Click [Start Assist Mode].
If starting the machine in Assist mode, this operation is not needed.
Service Support Tool DLM0 (Ver. X.XX E)
Target Selection CONTROL
Select the target.
Click a button to execute.
MFP
MFP
R egi s ter Firmw are
USB
D el et e Fi rmw are
De l et e B a c kup D at a
S y s te m M anagem ent
USB
c:
S t ar t A s s i st M ode
If the newer combination of system software than the machine is registered in SST, it will
be selected (highlighted).
MEMO :
If the older combination of system software than that of device is only registered,
nothing is selected. The system software in intended version can be downloaded by
selecting the specific combination manually.
6
Troubleshooting > Version Upgrade > Downloading System Software > Downloading Procedure (Assist mode)
Model List
Select a model to connect
CONNECT
START
EXIT
F-6-65
6 Troubleshooting > Version Upgrade > Downloading System Software > Downloading Procedure (Assist mode)
4) Click [Start].
Service Support Tool DLM10 (Ver. X.XX E) Assist Mode
172.16.1.10
PC Information Control
Available firmware version
Later version firmware was found
for connected copier.
Select firmware version.
To start upgrading, click [Start]
button.
USenXXXX(US)
USenXXXX(US)
USenXXXX(USS)
USenXXXX(US)
Confirm Download
Same Ver.: Skip/Downgrade: Confirm
Same Ver. and Downgrade: Confirm
Return to Main Menu
Overwrite all
When download is complete, the machine's power turns off automatically.
5) After 10 sec from the power off of the machine, turn on the main power switch.
6) Click [Next].
Service Support Tool DLM10 (Ver. X.XX E) Assist Mode
172.16.1.10
PC Information Control
Available firmware version Downloading of main controller
firmware was completed.
Shutdown sequence is started to
execute the writing process.
USenXXXX(US) When copier power is turned
USenXXXX(US)
OFF, click [Next] button.
USenXXXX(USS)
USenXXXX(US)
Confirm Download
Same Ver.: Skip/Downgrade: Confirm
Same Ver. and Downgrade: Confirm
Return to Main Menu
Overwrite all
The message prompts to shutdown will be displayed on the control panel.
7) Press reset key.
The power of the machine turns OFF.
Series : iPR1135
DL Mode : SAFE
172.16.1.100
MFP Information
Start
Cancel
F-6-66
Series : iPR1135
DL Mode : SAFE
172.16.1.100
MFP Information
Next
Cancel
F-6-67
6-48
6-48