Canon imagePRESS 1135 Series Service Manual page 716

8) Click [Next].
Service Support Tool DLM10 (Ver. X.XX E) Assist Mode
172.16.1.10
PC Information Control
Available firmware version
Power ON Copier and wait for the
message("Please hit Reset Key
to start shutdown.") on the
display, then press Reset key.
Copier is turned OFF
USenXXXX(US) automatically.
USenXXXX(US)
USenXXXX(USS)
When Copier power is turned
USenXXXX(US)
OFF, click [Next] button.
Confirm Download
Same Ver.: Skip/Downgrade: Confirm
Same Ver. and Downgrade: Confirm
Return to Main Menu
Overwrite all
9) Start the machine in normal mode. (While pressing 1 + 7, turn ON the main power switch.)
10) Enter the download mode in service mode.
11) Click [OK].
Service Support Tool DLM10 (Ver. X.XX E) Assist Mode
172.16.1.10
PC Information Control
Available firmware version Change download mode to
download remaining firmware.
Power ON Copier by holding
down 1 and 7 keys.
USenXXXX(US) When Copier enters download
USenXXXX(US)
mode of service mode, click [OK]
USenXXXX(USS)
button.
USenXXXX(US)
Confirm Download
Same Ver.: Skip/Downgrade: Confirm
Same Ver. and Downgrade: Confirm
Return to Main Menu
Overwrite all
When download is complete, the machine's power turns off automatically.
12) After 10 sec from the power off of the machine, turn on the main power switch.
6
Troubleshooting > Version Upgrade > Downloading System Software > Downloading Procedure (Assist mode)
Series : iPR1135
DL Mode : SAFE
172.16.1.100
MFP Information
Next
Cancel
F-6-68
Series : iPR1135
DL Mode : SAFE
172.16.1.100
MFP Information
OK
Cancel
F-6-69
6 Troubleshooting > Version Upgrade > Downloading System Software > Downloading Procedure (Assist mode)
13) Click [Next].
Service Support Tool DLM10 (Ver. X.XX E) Assist Mode
172.16.1.10
PC Information Control
Available firmware version
Downloading firmware was
completed.
Shutdown sequence is started to
execute the writing process.
USenXXXX(US) Power OFF Copier by following
USenXXXX(US)
the display and wait for 5
USenXXXX(USS)
seconds. Then, power ON.
USenXXXX(US)
Confirm Download
Same Ver.: Skip/Downgrade: Confirm
Same Ver. and Downgrade: Confirm
Return to Main Menu
Overwrite all
The message prompts to shutdown will be displayed on the control panel.
14) Press reset key.
The power of the machine turns off.
15) Remove the twisted pair cross cable from the machine.
16) Turn on the main power switch of the machine.
17) Check the system software version in service mode.
18) Click [OK].
Service Support Tool DLM10 (Ver. X.XX E) Assist Mode
172.16.1.10
PC Information Control
Available firmware version
Remove the cable between
Copier and PC, and restore
copier connection.
Power ON copier and verify
firmware version using service
USenXXXX(US) mode.
USenXXXX(US)
USenXXXX(USS)
Upgrading firmware was
USenXXXX(US)
completed. Click [OK] button to
return to Main Menu.
Confirm Download
Same Ver.: Skip/Downgrade: Confirm
Same Ver. and Downgrade: Confirm
Return to Main Menu
Overwrite all
Main menu is displayed.
Series : iPR1135
DL Mode : NORMAL
172.16.1.100
MFP Information
MEDIA
XXenXXXX
XXjaXXXX
RCON
XXxxXXXX
RUI
XXenXXXX
SDICT
XXjaXXXX
Next
SYSTEM
Active
USenXXXXn
Backup
Cancel
USenXXXXn
TTS
XXenXXXX
XXjaXXXX
F-6-70
Series : iPR1135
DL Mode : NORMAL
172.16.1.100
MFP Information
MEDIA
XXenXXXX
XXjaXXXX
RCON
XXxxXXXX
RUI
XXenXXXX
SDICT
XXjaXXXX
OK
SYSTEM
Active
USenXXXXn
Backup
Cancel
USenXXXXn
TTS
XXenXXXX
XXjaXXXX
F-6-71
6-49
6-49