Canon imagePRESS 1135 Series Service Manual page 809

Detail
Code Location Item
Code
E5B4 8002 52 Title DA error in gripper HP sensor (S15) of the 2nd stacker
Description When adjusting sensor, AD entry for gripper HP sensor (S15)
of detection failed to be within the adjustment range although making DA
output larger than the upper limit.
Measures 1. Check the connector of the gripper HP sensor (S15), and
replace the sensor if necessary.
2. Replace the master controller PCB.
E5B4 8002 61 Title Error in the sensor auto adjustment of the perfect binder.
Description Even the D/A output value of the cover registration sensor
of detection (S21) changed up to the upper limit value, the A/D input limit
can't get within the set range.
Measures 1. Clean the cover registration sensor (S21), and replace the
sensor if necessary.
2. Replace the master controller PCB.
E5B4 8003 61 Title Error in the sensor auto adjustment of the perfect binder.
Description Even the D/A output value of the cover side registration
of detection sensor (S) (S71) changed up to the upper limit value, the A/D
input limit can't get within the set range.
Measures 1. Clean the cover side registration sensor (S) (S71), and
replace the sensor if necessary.
2. Replace the master controller PCB.
E5B4 8004 61 Title Error in the sensor auto adjustment of the perfect binder.
Description Even the D/A output value of the cover side registration
of detection sensor (L) (S72) changed up to the upper limit value, the A/D
input limit can't get within the set range.
Measures 1. Clean the cover side registration sensor (L) (S72), replace
the sensor if necessary.
2. Replace the slave controller PCB.
E5B4 8005 61 Title Error in the sensor auto adjustment of the perfect binder.
Description Even the D/A output value of the stack delivery sensor (S64T/
of detection S64L) changed up to the upper limit value, the A/D input limit
can't get within the set range.
Measures 1. Clean the stack delivery sensor (S64T/S64L), replace the
sensor if necessary.
2. Replace the slave controller PCB.
E5B4 8006 61 Title Error in the sensor auto adjustment of the perfect binder.
Description Even the D/A output value of the leading edge detection
of detection sensor (S65T/S65L) changed up to the upper limit value, the
A/D input limit can't get within the set range.
Measures 1. Clean the leading edge detection sensor (S65T/S65L), and
replace the sensor if necessary.
2. Replace the slave controller PCB.
7
Error Code > Error Code > Error Code Details
Description
7 Error Code > Error Code > Error Code Details
Detail
Code Location Item
Code
E5B4 8007 61 Title Error in the sensor auto adjustment of the perfect binder.
Description Even the D/A output value of the input path sensor (S92T/
of detection S92L) changed up to the upper limit value, the A/D input limit
can't get within the set range.
Measures 1. Clean the inlet path sensor (S92T/S92L), and replace the
sensor if necessary.
2. Replace the cutter controller PCB.
E5B4 8008 61 Title Error in the sensor auto adjustment of the perfect binder.
Description Even the D/A output value of the registration sensor (S88T/
of detection S88L) changed up to the upper limit value, the A/D input limit
can't get within the set range.
Measures 1. Clean the registration sensor (S88T/S88L), and replace the
sensor if necessary.
2. Replace the cutter controller PCB.
E5B4 8011 51 Title DA error in side registration shift sensor (S1) of the stacker
Description When adjusting sensor, AD entry for side registration shift
of detection sensor (S1) failed to be within the adjustment range although
making DA output smaller than the upper limit.
Measures 1. Check the connector of the side registration shift sensor
(S1), and replace the sensor if necessary.
2. Replace the master controller PCB.
E5B4 8011 52 Title DA error in side registration shift sensor (S1) of the 2nd
stacker
Description When adjusting sensor, AD entry for side registration shift
of detection sensor (S1) failed to be within the adjustment range although
making DA output smaller than the upper limit.
Measures 1. Check the connector of the side registration shift sensor
(S1), and replace the sensor if necessary.
2. Replace the master controller PCB.
E5B4 8011 61 Title Error in the sensor auto adjustment of the perfect binder.
Description Even the D/A output value of the timing sensor (S5) changed
of detection up to the lower limit value, the A/D input limit can't get within
the set range.
Measures 1. Replace the timing sensor (S5).
2. Replace the master controller PCB.
E5B4 8012 51 Title DA error in gripper HP sensor (S15) of the stacker
Description When adjusting sensor, AD entry for gripper HP sensor (S15)
of detection failed to be within the adjustment range although making DA
output smaller than the upper limit.
Measures 1. Check the connector of the gripper HP sensor (S15), and
replace the sensor if necessary.
2. Replace the master controller PCB.
7-77
Description
7-77