Servicing Work - Canon imagePRESS 1135 Series Service Manual

2
Technology > Pickup / Feed System > Servicing work > Action for parts replacement

Servicing work

■ Periodically Replaced Parts
None
■ Durables
No. Part name Part No.
1 Delivery decurler belt unit 1 FM3-2611
2 Delivery decurler belt 1 FC7-4600
3 Delivery decurler belt unit 2 FM3-2613
4 Delivery decurler belt 2 FC7-4600
5 Duplexing decurler belt unit FM3-2613
6 Duplexing decurler belt FC7-4600
7 Deck separation pad (left) FL3-8119
8 Deck separation pad (right) FL3-8120
9 Solenoid FL2-1785
10 Paper dust Cleaning Brush FL2-7321
■ Periodial Servicing
No. Parts Name Task
1 Paper dust Cleaning Brush Cleaning
2 Optical sensor Cleaning
3 Deck inside, pickup unit Cleaning
4 Leading edge registration unit Cleaning
CIS sensor unit(glass/guide)
5 Pre-secondary transfer guide Cleaning
6 Post-secondary transfer guide Cleaning
7 Registration guide Cleaning
8 Other feed guide Cleaning
9 Pre-fixing feed belt Cleaning
10 Active roller Cleaning
2 Technology > Pickup / Feed System > Servicing work > Action for parts replacement
Q'ty Interval Remarks
1 6M Operators replace the unit and
service engineers replace the belt.
8 6M
1 6M Operators replace the unit and
service engineers replace the belt.
8 6M
1 6M Operators replace the unit and
service engineers replace the belt.
8 6M
1 2.5M
1 2.5M
1 5M
4 1M Cleaning of paper dust
Interval Remarks
500K Cleaning of paper dust
500K Cleaning of paper dust. Target: image
standard sensor, post secondary transfer
sensor, No. 1 skew inspection sensor
(front)/(rear), No. 2 skew inspection
sensor (front)/(rear), pre-registration
sensor (front), post-registration sensor
(rear).
500K Cleaning of paper dust
500K Cleaning of paper dust and toner
500K Cleaning of paper dust and toner.
(Cleaning with alcohol)
200K Cleaning of paper dust
500K Cleaning of paper dust
500K Cleaning of paper dust and toner
200K Cleaning of paper dust (registration
roller, skew correction roller)
500K Cleaning of paper dust
No. Parts Name
11 Feed roller
12 Wheel
13 Post-secondary transfer static
eliminator
■ Action for parts replacement
● Skew detection sensor
1) Perform the light intensity auto adjustment : COPIER > FUNCTION > SENS-ADJ > OP-
SENS
2) Adjust the skew
● Skew roller, skew driven roller
1) Apply grease in the bearing and shaft (super lube grease : FY9-6006)
2) Adjust the skew
● CIS sensor
T-2-87
1) Perform the LED light intensity auto adjustment of CIS : COPIER > FUNCTION > SENS-
ADJ > CIS
2) Adjust the right edge registration.
● Image standard sensor, post-registration sensor, pre-registration
sensor
1) Perform the light intensity auto adjustment : COPIER > FUNCTION > SENS-ADJ > OP-
SENS
2) Adjust the leading edge registration
● Registration roller, registration driven roller
1) Apply grease in the bearing and shaft (super lube grease : FY9-6006)
2) Adjust the skew
3) Adjust the right edge registration
4) Adjust the leading edge registration
Task Interval Remarks
Cleaning 500K Pre-registration assembly (x4), active
registration assembly (x2), buffer
delivery upper unit (x4)
Cleaning 200K (Cleaning with alcohol)
Cleaning 200K Cleaning of toner
2-136
T-2-88
2-136