Canon imagePRESS 1135 Series Service Manual page 762

Detail
Code Location Item
Code
E407 0002 01 Title Abnormality in tray lifter motor (M8)
Description If within the specified time paper surface sensor (SR6) is not
of detection turned ON when the lifter is moving up.
Measures 1. Check the connector of the paper surface sensor (SR6).
2. Check the connector of the tray lifter motor (M8).
3. Replace the paper surface sensor (SR6).
4. Replace the tray lifter motor (M8).
E413 0001 01 Title Abnormality in DADF disengaging motor 1 (M6)
Description DADF disengaging home position sensor 1 (SR15) OPEN.
of detection
Measures 1. Check the connector of the disengaging home position
sensor 1 (SR15).
2. Check the connector of the disengaging motor 1 (M6).
3. Replace the disengaging home position sensor 1 (SR15).
4. Replace the disengaging motor 1 (M6).
5. Replace the DADF driver PCB (PCB1).
E413 0002 01 Title Abnormality in DADF disengaging motor 1 (M6)
Description DADF disengaging home position sensor 1 (SR15) CLOSE.
of detection
Measures 1. Check the connector of the disengaging home position
sensor 1 (SR15).
2. Check the connector of the disengaging motor 1 (M6).
3. Replace the disengaging home position sensor 1 (SR15).
4. Replace the disengaging motor 1 (M6).
5. Replace the DADF driver PCB (PCB1).
E413 0011 01 Title Abnormality in DADF disengaging motor 2 (M7)
Description DADF disengaging home position sensor 2 (SR16) OPEN.
of detection
Measures 1. Check the connector of the disengaging home position
sensor 2 (SR16).
2. Check the connector of the disengaging motor 2 (M7).
3. Replace the disengaging home position sensor 2 (SR16).
4. Replace the disengaging motor 2 (M7).
5. Replace the DADF driver PCB (PCB1).
E413 0012 01 Title Abnormality in DADF disengaging motor 2 (M7)
Description DADF disengaging home position sensor 2 (SR16) CLOSE.
of detection
Measures 1. Check the connector of the disengaging home position
sensor 2 (SR16).
2. Check the connector of the disengaging motor 2 (M7).
3. Replace the disengaging home position sensor 2 (SR16).
4. Replace the disengaging motor 2 (M7).
5. Replace the DADF driver PCB (PCB1).
7
Error Code > Error Code > Error Code Details
Description
7 Error Code > Error Code > Error Code Details
Detail
Code Location Item
Code
E423 0001 01 Title Error in SDRAM
Description Error in the SDRAM access.
of detection
Measures SDRAM (video image memory) error in the Reader Controller
PCB
E423 0002 01 Title Error in the SDRAM
Description Error in the SDRAM verification.
of detection
Measures SDRAM (video image memory) error in the Reader Controller
PCB
E490 0001 01 Title Difference in DADF type machine
Description The installed DADF is not the supported DADF.
of detection
Measures 1. The DADF installed is of different type machine.
2. Replace the reader controller PCB (PCB1).
3. Replace the DC controller PCB.
4. Replace the main Controller PCB.
7-30
Description
T-7-5
7-30