Canon imagePRESS 1135 Series Service Manual page 853

Detail
Code Location Item
Code
E602 1322 00 Title Error in the Hard Disc
Description The abnormality is in /APL_LOG
of detection
Measures Error caused by garbled data and software bug.
1. Activate using the save mode, re-install all the format and
system (SYSTEM, LANGUAGE, RUI) on the SST, turn the
main power OFF/ON.
2. If the problem still persists, it is concluded that there is
trouble in the HDD, hence replace the HDD and re-install
the system.
E602 1323 00 Title Error in the Hard Disc
Description The abnormality is in /APL_LOG
of detection
Measures Error caused by garbled data and software bug.
1. Activate using the save mode, re-install all the format and
system (SYSTEM, LANGUAGE, RUI) on the SST, turn the
main power OFF/ON.
2. If the problem still persists, it is concluded that there is
trouble in the HDD, hence replace the HDD and re-install
the system.
E602 1324 00 Title Error in the Hard Disc
Description The abnormality is in /APL_LOG
of detection
Measures Error caused by garbled data and software bug.
1. Activate using the save mode, re-install all the format and
system (SYSTEM, LANGUAGE, RUI) on the SST, turn the
main power OFF/ON.
2. If the problem still persists, it is concluded that there is
trouble in the HDD, hence replace the HDD and re-install
the system.
E602 1325 00 Title Error in the Hard Disc
Description The abnormality is in /APL_LOG
of detection
Measures High possibility that the document data of BOX etc, on the
HDD is broken.
1. Input the CHK-TYPE corresponds to the partition, execute
HDD-CHECK (required time : few minutes to several tens
minutes), and turn the power OFF/ON.
2. If the problem persists after the above is performed, input
the CHK-TYPE corresponds to the partition, execute the
HDD-CLEAR, and turn the main power OFF/ON.
(For BOOTDEV, BOOTDEV2, APL_SEND, re-format and
re-install in the SST)
3. If the problem still persists, it is concluded that there is
trouble in the HDD, hence replace the HDD and re-install
the system.
7
Error Code > Error Code > Error Code Details
Description
7 Error Code > Error Code > Error Code Details
Detail
Code Location Item
Code
E602 2000 00 Title Error in authentication between host machine and encryption
board
Description Authentication error of host machine and encryption board
of detection
Measures 1. Check the connection between the encryption board and
the main controller PCB (power OFF/ON).
2. Using SST, execute key clear of encryption board. (At
this time, HDD is changed to unformatted status; thus,
it is necessary to format HDD and reinstall the system
firmware.)
E602 2001 00 Title Mismatch on encryption board operation
Description Even though there is no authentication information of
of detection encryption board on the host machine, authenticated
encryption board is inserted etc.
Measures Using SST, execute key clear of encryption board (At this
time, HDD is changed to unformatted status; thus, it is
necessary to format HDD and reinstall the system firmware.)
E602 2002 00 Title Failure of encryption board and others
Description Failure of encryption board and others
of detection
Measures 1. Check the connection between the encryption board and
the main controller PCB (power OFF/ON).
2. Using SST, execute key clear of encryption board. (At
this time, HDD is changed to unformatted status; thus,
it is necessary to format HDD and reinstall the system
firmware.)
3. After the replacement of encryption board, format the HDD
and reinstall the SYSTEM with SST.
4. Replace the main controller PCB.
E602 FF00 00 Title Error in the Hard Disc
Description Error in the unspecified partition.
of detection
Measures 1. Check the cable and power connector, etc.
2. If the problem persists after the above is performed,
activate using the save mode, and re-install all format and
system (SYSTEM, LANGUAGE, RUI) on the SST, and turn
the main power OFF/ON.
3. If the problem still persists, it is concluded that there is
trouble in the HDD, hence replace the HDD and re-install
the system.
7-121
Description
7-121