Canon imagePRESS 1135 Series Service Manual page 113

2
Technology > Fixing System > Overview > Main Parts Configuration
■ Main Parts Configuration
Cleaning web
Fixing heater
Termistor
Termo switch
Upper
separration claw
Lower
separration claw
Refresh roller
2 Technology > Fixing System > Overview > Main Parts Configuration
External heat roller
External heat
cleaning roller
Fixing roller
Pressure roller
F-2-88
Parts Configuration Feature / Function / Method
1 Fixing roller Fix toner to paper.
2 Pressure roller Fix toner to paper.
3 External heating upper roller Controlled temperature decrease at
continuous printing.
4 External heating lower roller Controlled temperature decrease at
continuous printing.
5 Cleaning web Clean the fixing roller via the collection
roller.
6 Refresh roller Remove scratches on the surface of the
pressure roller.
7 External heating upper/lower Clean the external heating upper/lower
cleaning roller roller.
8 Upper separation claw Separate paper from the fixing roller.
9 Lower separation claw Separate paper from the pressure roller.
10 Fixing heater Main Halogen heater: 700 W
heater
Sub heater Halogen heater: 600 W
11 Pressure heater Main Halogen heater: 400 W
heater
Sub heater Halogen heater: 400 W
12 External Main Halogen heater: 650 W
heating upper heater
heater
Sub heater Halogen heater: 650 W
13 External Main Halogen heater: 400 W
heating lower heater
heater
Sub heater Halogen heater: 400 W
14 Thermistor Detection temperature on the surface of
each roller.
15 Thermo switch Detection abnormal high temperature of
each roller.
2-65
Remarks
80 mm dia
60 mm dia
36 mm dia
36 mm dia
Main and sub heaters
provided as a unit
T-2-56
2-65