Canon imagePRESS 1135 Series Service Manual page 225

2
Technology > MEAP > Setting HTTP port for MEAP application (level 2)
9) Check to see that it is reflected in setting field, and turn off the main power, and then,
restart the device.
<Setting Procedure of port on HTTPS server>
1) Startup [SERVICE MODE].
2) Startup level 2 of [SERVICE MODE] (After starting up [SERVICE MODE] in step 1, press
[USER MODE] button again. Then, by pressing [2] button on control panel, the screen is
displayed.
3) Press [COPIER] button.
4) Press [Option] button.
5) Press [BODY] button.
6) Press or button.
2 Technology > MEAP > Setting HTTP port for MEAP application (level 2)
7) Press [MEAP-SSL] button.
8) Press the port number to specify on the control panel (the numerical value input in the field
F-2-263
is displayed), and press [OK] button.
2-177
F-2-264
F-2-265
2-177